FM / Resource

/var/www/flurhymez/vendor/google/apiclient-services/src/Compute/Resource/

/var/www/flurhymez/vendor/google/apiclient-services/src/Compute/Resource

Name	Size	Mode	Actions
AcceleratorTypes.php	9221	0644	edit dl rm
Addresses.php	11827	0644	edit dl rm
Autoscalers.php	14927	0644	edit dl rm
BackendBuckets.php	15563	0644	edit dl rm
BackendServices.php	22361	0644	edit dl rm
Disks.php	23191	0644	edit dl rm
DiskTypes.php	9080	0644	edit dl rm
ExternalVpnGateways.php	9575	0644	edit dl rm
FirewallPolicies.php	22735	0644	edit dl rm
Firewalls.php	10578	0644	edit dl rm
ForwardingRules.php	17085	0644	edit dl rm
GlobalAddresses.php	7666	0644	edit dl rm
GlobalForwardingRules.php	11929	0644	edit dl rm
GlobalNetworkEndpointGroups.php	15534	0644	edit dl rm
GlobalOperations.php	10774	0644	edit dl rm
GlobalOrganizationOperations.php	5684	0644	edit dl rm
GlobalPublicDelegatedPrefixes.php	9752	0644	edit dl rm
HealthChecks.php	14720	0644	edit dl rm
HttpHealthChecks.php	10960	0644	edit dl rm
HttpsHealthChecks.php	11018	0644	edit dl rm
ImageFamilyViews.php	1835	0644	edit dl rm
Images.php	14489	0644	edit dl rm
InstanceGroupManagers.php	50057	0644	edit dl rm
InstanceGroups.php	21947	0644	edit dl rm
Instances.php	71719	0644	edit dl rm
InstanceTemplates.php	10612	0644	edit dl rm
InterconnectAttachments.php	14161	0644	edit dl rm
InterconnectLocations.php	5327	0644	edit dl rm
Interconnects.php	9974	0644	edit dl rm
LicenseCodes.php	2848	0644	edit dl rm
Licenses.php	11026	0644	edit dl rm
MachineImages.php	10470	0644	edit dl rm
MachineTypes.php	9167	0644	edit dl rm
NetworkEndpointGroups.php	21723	0644	edit dl rm
Networks.php	19494	0644	edit dl rm
NodeGroups.php	24549	0644	edit dl rm
NodeTemplates.php	14695	0644	edit dl rm
NodeTypes.php	9080	0644	edit dl rm
PacketMirrorings.php	14746	0644	edit dl rm
Projects.php	22261	0644	edit dl rm
PublicAdvertisedPrefixes.php	9660	0644	edit dl rm
PublicDelegatedPrefixes.php	14191	0644	edit dl rm
RegionAutoscalers.php	11134	0644	edit dl rm
RegionBackendServices.php	12676	0644	edit dl rm
RegionCommitments.php	12486	0644	edit dl rm
RegionDisks.php	19013	0644	edit dl rm
RegionDiskTypes.php	5303	0644	edit dl rm
RegionHealthChecks.php	11404	0644	edit dl rm
RegionHealthCheckServices.php	10354	0644	edit dl rm
RegionInstanceGroupManagers.php	44475	0644	edit dl rm
RegionInstanceGroups.php	11214	0644	edit dl rm
RegionInstances.php	2640	0644	edit dl rm
RegionNetworkEndpointGroups.php	8989	0644	edit dl rm
RegionNotificationEndpoints.php	8517	0644	edit dl rm
RegionOperations.php	7279	0644	edit dl rm
Regions.php	5962	0644	edit dl rm
RegionSslCertificates.php	8416	0644	edit dl rm
RegionTargetHttpProxies.php	10037	0644	edit dl rm
RegionTargetHttpsProxies.php	11830	0644	edit dl rm
RegionUrlMaps.php	9632	0644	edit dl rm
Reservations.php	17709	0644	edit dl rm
ResourcePolicies.php	14679	0644	edit dl rm
Routers.php	20324	0644	edit dl rm
Routes.php	7550	0644	edit dl rm
SecurityPolicies.php	15717	0644	edit dl rm
ServiceAttachments.php	16758	0644	edit dl rm
Snapshots.php	11268	0644	edit dl rm
SslCertificates.php	11866	0644	edit dl rm
SslPolicies.php	12876	0644	edit dl rm
Subnetworks.php	23672	0644	edit dl rm
TargetGrpcProxies.php	9441	0644	edit dl rm
TargetHttpProxies.php	14954	0644	edit dl rm
TargetHttpsProxies.php	20118	0644	edit dl rm
TargetInstances.php	12162	0644	edit dl rm
TargetPools.php	21065	0644	edit dl rm
TargetSslProxies.php	14472	0644	edit dl rm
TargetTcpProxies.php	11061	0644	edit dl rm
TargetVpnGateways.php	12230	0644	edit dl rm
UrlMaps.php	16908	0644	edit dl rm
VpnGateways.php	15249	0644	edit dl rm
VpnTunnels.php	11985	0644	edit dl rm
ZoneOperations.php	7139	0644	edit dl rm
Zones.php	4940	0644	edit dl rm

Edit: /var/www/flurhymez/vendor/google/apiclient-services/src/Compute/Resource/InstanceGroupManagers.php (50057B)

<?php
/*
 * Copyright 2014 Google Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License"); you may not
 * use this file except in compliance with the License. You may obtain a copy of
 * the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 * License for the specific language governing permissions and limitations under
 * the License.
 */

namespace Google\Service\Compute\Resource;

use Google\Service\Compute\InstanceGroupManager;
use Google\Service\Compute\InstanceGroupManagerAggregatedList;
use Google\Service\Compute\InstanceGroupManagerList;
use Google\Service\Compute\InstanceGroupManagersAbandonInstancesRequest;
use Google\Service\Compute\InstanceGroupManagersApplyUpdatesRequest;
use Google\Service\Compute\InstanceGroupManagersCreateInstancesRequest;
use Google\Service\Compute\InstanceGroupManagersDeleteInstancesRequest;
use Google\Service\Compute\InstanceGroupManagersDeletePerInstanceConfigsReq;
use Google\Service\Compute\InstanceGroupManagersListErrorsResponse;
use Google\Service\Compute\InstanceGroupManagersListManagedInstancesResponse;
use Google\Service\Compute\InstanceGroupManagersListPerInstanceConfigsResp;
use Google\Service\Compute\InstanceGroupManagersPatchPerInstanceConfigsReq;
use Google\Service\Compute\InstanceGroupManagersRecreateInstancesRequest;
use Google\Service\Compute\InstanceGroupManagersSetInstanceTemplateRequest;
use Google\Service\Compute\InstanceGroupManagersSetTargetPoolsRequest;
use Google\Service\Compute\InstanceGroupManagersUpdatePerInstanceConfigsReq;
use Google\Service\Compute\Operation;

/**
 * The "instanceGroupManagers" collection of methods.
 * Typical usage is:
 *  <code>
 *   $computeService = new Google\Service\Compute(...);
 *   $instanceGroupManagers = $computeService->instanceGroupManagers;
 *  </code>
 */
class InstanceGroupManagers extends \Google\Service\Resource
{
  /**
   * Flags the specified instances to be removed from the managed instance group.
   * Abandoning an instance does not delete the instance, but it does remove the
   * instance from any target pools that are applied by the managed instance
   * group. This method reduces the targetSize of the managed instance group by
   * the number of instances that you abandon. This operation is marked as DONE
   * when the action is scheduled even if the instances have not yet been removed
   * from the group. You must separately verify the status of the abandoning
   * action with the listmanagedinstances method. If the group is part of a
   * backend service that has enabled connection draining, it can take up to 60
   * seconds after the connection draining duration has elapsed before the VM
   * instance is removed or deleted. You can specify a maximum of 1000 instances
   * with this method per request. (instanceGroupManagers.abandonInstances)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone where the managed instance group is
   * located.
   * @param string $instanceGroupManager The name of the managed instance group.
   * @param InstanceGroupManagersAbandonInstancesRequest $postBody
   * @param array $optParams Optional parameters.
   *
   * @opt_param string requestId An optional request ID to identify requests.
   * Specify a unique request ID so that if you must retry your request, the
   * server will know to ignore the request if it has already been completed. For
   * example, consider a situation where you make an initial request and the
   * request times out. If you make the request again with the same request ID,
   * the server can check if original operation with the same request ID was
   * received, and if so, will ignore the second request. This prevents clients
   * from accidentally creating duplicate commitments. The request ID must be a
   * valid UUID with the exception that zero UUID is not supported (
   * 00000000-0000-0000-0000-000000000000).
   * @return Operation
   */
  public function abandonInstances($project, $zone, $instanceGroupManager, InstanceGroupManagersAbandonInstancesRequest $postBody, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody];
    $params = array_merge($params, $optParams);
    return $this->call('abandonInstances', [$params], Operation::class);
  }
  /**
   * Retrieves the list of managed instance groups and groups them by zone.
   * (instanceGroupManagers.aggregatedList)
   *
   * @param string $project Project ID for this request.
   * @param array $optParams Optional parameters.
   *
   * @opt_param string filter A filter expression that filters resources listed in
   * the response. The expression must specify the field name, an operator, and
   * the value that you want to use for filtering. The value must be a string, a
   * number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`,
   * `>=` or `:`. For example, if you are filtering Compute Engine instances, you
   * can exclude instances named `example-instance` by specifying `name !=
   * example-instance`. The `:` operator can be used with string fields to match
   * substrings. For non-string fields it is equivalent to the `=` operator. The
   * `:*` comparison can be used to test whether a key has been defined. For
   * example, to find all objects with `owner` label use: ``` labels.owner:* ```
   * You can also filter nested fields. For example, you could specify
   * `scheduling.automaticRestart = false` to include instances only if they are
   * not scheduled for automatic restarts. You can use filtering on nested fields
   * to filter based on resource labels. To filter on multiple expressions,
   * provide each separate expression within parentheses. For example: ```
   * (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By
   * default, each expression is an `AND` expression. However, you can include
   * `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel
   * Skylake") OR (cpuPlatform = "Intel Broadwell") AND
   * (scheduling.automaticRestart = true) ```
   * @opt_param bool includeAllScopes Indicates whether every visible scope for
   * each scope type (zone, region, global) should be included in the response.
   * For new resource types added after this field, the flag has no effect as new
   * resource types will always include every visible scope for each scope type in
   * response. For resource types which predate this field, if this flag is
   * omitted or false, only scopes of the scope types where the resource type is
   * expected to be found will be included.
   * @opt_param string maxResults The maximum number of results per page that
   * should be returned. If the number of available results is larger than
   * `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
   * get the next page of results in subsequent list requests. Acceptable values
   * are `0` to `500`, inclusive. (Default: `500`)
   * @opt_param string orderBy Sorts list results by a certain order. By default,
   * results are returned in alphanumerical order based on the resource name. You
   * can also sort results in descending order based on the creation timestamp
   * using `orderBy="creationTimestamp desc"`. This sorts results based on the
   * `creationTimestamp` field in reverse chronological order (newest result
   * first). Use this to sort resources like operations so that the newest
   * operation is returned first. Currently, only sorting by `name` or
   * `creationTimestamp desc` is supported.
   * @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
   * the `nextPageToken` returned by a previous list request to get the next page
   * of results.
   * @opt_param bool returnPartialSuccess Opt-in for partial success behavior
   * which provides partial results in case of failure. The default value is
   * false.
   * @return InstanceGroupManagerAggregatedList
   */
  public function aggregatedList($project, $optParams = [])
  {
    $params = ['project' => $project];
    $params = array_merge($params, $optParams);
    return $this->call('aggregatedList', [$params], InstanceGroupManagerAggregatedList::class);
  }
  /**
   * Applies changes to selected instances on the managed instance group. This
   * method can be used to apply new overrides and/or new versions.
   * (instanceGroupManagers.applyUpdatesToInstances)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone where the managed instance group is
   * located. Should conform to RFC1035.
   * @param string $instanceGroupManager The name of the managed instance group,
   * should conform to RFC1035.
   * @param InstanceGroupManagersApplyUpdatesRequest $postBody
   * @param array $optParams Optional parameters.
   * @return Operation
   */
  public function applyUpdatesToInstances($project, $zone, $instanceGroupManager, InstanceGroupManagersApplyUpdatesRequest $postBody, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody];
    $params = array_merge($params, $optParams);
    return $this->call('applyUpdatesToInstances', [$params], Operation::class);
  }
  /**
   * Creates instances with per-instance configs in this managed instance group.
   * Instances are created using the current instance template. The create
   * instances operation is marked DONE if the createInstances request is
   * successful. The underlying actions take additional time. You must separately
   * verify the status of the creating or actions with the listmanagedinstances
   * method. (instanceGroupManagers.createInstances)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone where the managed instance group is
   * located. It should conform to RFC1035.
   * @param string $instanceGroupManager The name of the managed instance group.
   * It should conform to RFC1035.
   * @param InstanceGroupManagersCreateInstancesRequest $postBody
   * @param array $optParams Optional parameters.
   *
   * @opt_param string requestId An optional request ID to identify requests.
   * Specify a unique request ID so that if you must retry your request, the
   * server will know to ignore the request if it has already been completed. For
   * example, consider a situation where you make an initial request and the
   * request times out. If you make the request again with the same request ID,
   * the server can check if original operation with the same request ID was
   * received, and if so, will ignore the second request. The request ID must be a
   * valid UUID with the exception that zero UUID is not supported (
   * 00000000-0000-0000-0000-000000000000).
   * @return Operation
   */
  public function createInstances($project, $zone, $instanceGroupManager, InstanceGroupManagersCreateInstancesRequest $postBody, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody];
    $params = array_merge($params, $optParams);
    return $this->call('createInstances', [$params], Operation::class);
  }
  /**
   * Deletes the specified managed instance group and all of the instances in that
   * group. Note that the instance group must not belong to a backend service.
   * Read Deleting an instance group for more information.
   * (instanceGroupManagers.delete)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone where the managed instance group is
   * located.
   * @param string $instanceGroupManager The name of the managed instance group to
   * delete.
   * @param array $optParams Optional parameters.
   *
   * @opt_param string requestId An optional request ID to identify requests.
   * Specify a unique request ID so that if you must retry your request, the
   * server will know to ignore the request if it has already been completed. For
   * example, consider a situation where you make an initial request and the
   * request times out. If you make the request again with the same request ID,
   * the server can check if original operation with the same request ID was
   * received, and if so, will ignore the second request. This prevents clients
   * from accidentally creating duplicate commitments. The request ID must be a
   * valid UUID with the exception that zero UUID is not supported (
   * 00000000-0000-0000-0000-000000000000).
   * @return Operation
   */
  public function delete($project, $zone, $instanceGroupManager, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager];
    $params = array_merge($params, $optParams);
    return $this->call('delete', [$params], Operation::class);
  }
  /**
   * Flags the specified instances in the managed instance group for immediate
   * deletion. The instances are also removed from any target pools of which they
   * were a member. This method reduces the targetSize of the managed instance
   * group by the number of instances that you delete. This operation is marked as
   * DONE when the action is scheduled even if the instances are still being
   * deleted. You must separately verify the status of the deleting action with
   * the listmanagedinstances method. If the group is part of a backend service
   * that has enabled connection draining, it can take up to 60 seconds after the
   * connection draining duration has elapsed before the VM instance is removed or
   * deleted. You can specify a maximum of 1000 instances with this method per
   * request. (instanceGroupManagers.deleteInstances)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone where the managed instance group is
   * located.
   * @param string $instanceGroupManager The name of the managed instance group.
   * @param InstanceGroupManagersDeleteInstancesRequest $postBody
   * @param array $optParams Optional parameters.
   *
   * @opt_param string requestId An optional request ID to identify requests.
   * Specify a unique request ID so that if you must retry your request, the
   * server will know to ignore the request if it has already been completed. For
   * example, consider a situation where you make an initial request and the
   * request times out. If you make the request again with the same request ID,
   * the server can check if original operation with the same request ID was
   * received, and if so, will ignore the second request. This prevents clients
   * from accidentally creating duplicate commitments. The request ID must be a
   * valid UUID with the exception that zero UUID is not supported (
   * 00000000-0000-0000-0000-000000000000).
   * @return Operation
   */
  public function deleteInstances($project, $zone, $instanceGroupManager, InstanceGroupManagersDeleteInstancesRequest $postBody, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody];
    $params = array_merge($params, $optParams);
    return $this->call('deleteInstances', [$params], Operation::class);
  }
  /**
   * Deletes selected per-instance configs for the managed instance group.
   * (instanceGroupManagers.deletePerInstanceConfigs)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone where the managed instance group is
   * located. It should conform to RFC1035.
   * @param string $instanceGroupManager The name of the managed instance group.
   * It should conform to RFC1035.
   * @param InstanceGroupManagersDeletePerInstanceConfigsReq $postBody
   * @param array $optParams Optional parameters.
   * @return Operation
   */
  public function deletePerInstanceConfigs($project, $zone, $instanceGroupManager, InstanceGroupManagersDeletePerInstanceConfigsReq $postBody, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody];
    $params = array_merge($params, $optParams);
    return $this->call('deletePerInstanceConfigs', [$params], Operation::class);
  }
  /**
   * Returns all of the details about the specified managed instance group. Gets a
   * list of available managed instance groups by making a list() request.
   * (instanceGroupManagers.get)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone where the managed instance group is
   * located.
   * @param string $instanceGroupManager The name of the managed instance group.
   * @param array $optParams Optional parameters.
   * @return InstanceGroupManager
   */
  public function get($project, $zone, $instanceGroupManager, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager];
    $params = array_merge($params, $optParams);
    return $this->call('get', [$params], InstanceGroupManager::class);
  }
  /**
   * Creates a managed instance group using the information that you specify in
   * the request. After the group is created, instances in the group are created
   * using the specified instance template. This operation is marked as DONE when
   * the group is created even if the instances in the group have not yet been
   * created. You must separately verify the status of the individual instances
   * with the listmanagedinstances method. A managed instance group can have up to
   * 1000 VM instances per group. Please contact Cloud Support if you need an
   * increase in this limit. (instanceGroupManagers.insert)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone where you want to create the managed
   * instance group.
   * @param InstanceGroupManager $postBody
   * @param array $optParams Optional parameters.
   *
   * @opt_param string requestId An optional request ID to identify requests.
   * Specify a unique request ID so that if you must retry your request, the
   * server will know to ignore the request if it has already been completed. For
   * example, consider a situation where you make an initial request and the
   * request times out. If you make the request again with the same request ID,
   * the server can check if original operation with the same request ID was
   * received, and if so, will ignore the second request. This prevents clients
   * from accidentally creating duplicate commitments. The request ID must be a
   * valid UUID with the exception that zero UUID is not supported (
   * 00000000-0000-0000-0000-000000000000).
   * @return Operation
   */
  public function insert($project, $zone, InstanceGroupManager $postBody, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'postBody' => $postBody];
    $params = array_merge($params, $optParams);
    return $this->call('insert', [$params], Operation::class);
  }
  /**
   * Retrieves a list of managed instance groups that are contained within the
   * specified project and zone. (instanceGroupManagers.listInstanceGroupManagers)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone where the managed instance group is
   * located.
   * @param array $optParams Optional parameters.
   *
   * @opt_param string filter A filter expression that filters resources listed in
   * the response. The expression must specify the field name, an operator, and
   * the value that you want to use for filtering. The value must be a string, a
   * number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`,
   * `>=` or `:`. For example, if you are filtering Compute Engine instances, you
   * can exclude instances named `example-instance` by specifying `name !=
   * example-instance`. The `:` operator can be used with string fields to match
   * substrings. For non-string fields it is equivalent to the `=` operator. The
   * `:*` comparison can be used to test whether a key has been defined. For
   * example, to find all objects with `owner` label use: ``` labels.owner:* ```
   * You can also filter nested fields. For example, you could specify
   * `scheduling.automaticRestart = false` to include instances only if they are
   * not scheduled for automatic restarts. You can use filtering on nested fields
   * to filter based on resource labels. To filter on multiple expressions,
   * provide each separate expression within parentheses. For example: ```
   * (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By
   * default, each expression is an `AND` expression. However, you can include
   * `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel
   * Skylake") OR (cpuPlatform = "Intel Broadwell") AND
   * (scheduling.automaticRestart = true) ```
   * @opt_param string maxResults The maximum number of results per page that
   * should be returned. If the number of available results is larger than
   * `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
   * get the next page of results in subsequent list requests. Acceptable values
   * are `0` to `500`, inclusive. (Default: `500`)
   * @opt_param string orderBy Sorts list results by a certain order. By default,
   * results are returned in alphanumerical order based on the resource name. You
   * can also sort results in descending order based on the creation timestamp
   * using `orderBy="creationTimestamp desc"`. This sorts results based on the
   * `creationTimestamp` field in reverse chronological order (newest result
   * first). Use this to sort resources like operations so that the newest
   * operation is returned first. Currently, only sorting by `name` or
   * `creationTimestamp desc` is supported.
   * @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
   * the `nextPageToken` returned by a previous list request to get the next page
   * of results.
   * @opt_param bool returnPartialSuccess Opt-in for partial success behavior
   * which provides partial results in case of failure. The default value is
   * false.
   * @return InstanceGroupManagerList
   */
  public function listInstanceGroupManagers($project, $zone, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone];
    $params = array_merge($params, $optParams);
    return $this->call('list', [$params], InstanceGroupManagerList::class);
  }
  /**
   * Lists all errors thrown by actions on instances for a given managed instance
   * group. The filter and orderBy query parameters are not supported.
   * (instanceGroupManagers.listErrors)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone where the managed instance group is
   * located. It should conform to RFC1035.
   * @param string $instanceGroupManager The name of the managed instance group.
   * It must be a string that meets the requirements in RFC1035, or an unsigned
   * long integer: must match regexp pattern:
   * (?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?)|1-9{0,19}.
   * @param array $optParams Optional parameters.
   *
   * @opt_param string filter A filter expression that filters resources listed in
   * the response. The expression must specify the field name, an operator, and
   * the value that you want to use for filtering. The value must be a string, a
   * number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`,
   * `>=` or `:`. For example, if you are filtering Compute Engine instances, you
   * can exclude instances named `example-instance` by specifying `name !=
   * example-instance`. The `:` operator can be used with string fields to match
   * substrings. For non-string fields it is equivalent to the `=` operator. The
   * `:*` comparison can be used to test whether a key has been defined. For
   * example, to find all objects with `owner` label use: ``` labels.owner:* ```
   * You can also filter nested fields. For example, you could specify
   * `scheduling.automaticRestart = false` to include instances only if they are
   * not scheduled for automatic restarts. You can use filtering on nested fields
   * to filter based on resource labels. To filter on multiple expressions,
   * provide each separate expression within parentheses. For example: ```
   * (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By
   * default, each expression is an `AND` expression. However, you can include
   * `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel
   * Skylake") OR (cpuPlatform = "Intel Broadwell") AND
   * (scheduling.automaticRestart = true) ```
   * @opt_param string maxResults The maximum number of results per page that
   * should be returned. If the number of available results is larger than
   * `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
   * get the next page of results in subsequent list requests. Acceptable values
   * are `0` to `500`, inclusive. (Default: `500`)
   * @opt_param string orderBy Sorts list results by a certain order. By default,
   * results are returned in alphanumerical order based on the resource name. You
   * can also sort results in descending order based on the creation timestamp
   * using `orderBy="creationTimestamp desc"`. This sorts results based on the
   * `creationTimestamp` field in reverse chronological order (newest result
   * first). Use this to sort resources like operations so that the newest
   * operation is returned first. Currently, only sorting by `name` or
   * `creationTimestamp desc` is supported.
   * @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
   * the `nextPageToken` returned by a previous list request to get the next page
   * of results.
   * @opt_param bool returnPartialSuccess Opt-in for partial success behavior
   * which provides partial results in case of failure. The default value is
   * false.
   * @return InstanceGroupManagersListErrorsResponse
   */
  public function listErrors($project, $zone, $instanceGroupManager, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager];
    $params = array_merge($params, $optParams);
    return $this->call('listErrors', [$params], InstanceGroupManagersListErrorsResponse::class);
  }
  /**
   * Lists all of the instances in the managed instance group. Each instance in
   * the list has a currentAction, which indicates the action that the managed
   * instance group is performing on the instance. For example, if the group is
   * still creating an instance, the currentAction is CREATING. If a previous
   * action failed, the list displays the errors for that failed action. The
   * orderBy query parameter is not supported.
   * (instanceGroupManagers.listManagedInstances)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone where the managed instance group is
   * located.
   * @param string $instanceGroupManager The name of the managed instance group.
   * @param array $optParams Optional parameters.
   *
   * @opt_param string filter A filter expression that filters resources listed in
   * the response. The expression must specify the field name, an operator, and
   * the value that you want to use for filtering. The value must be a string, a
   * number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`,
   * `>=` or `:`. For example, if you are filtering Compute Engine instances, you
   * can exclude instances named `example-instance` by specifying `name !=
   * example-instance`. The `:` operator can be used with string fields to match
   * substrings. For non-string fields it is equivalent to the `=` operator. The
   * `:*` comparison can be used to test whether a key has been defined. For
   * example, to find all objects with `owner` label use: ``` labels.owner:* ```
   * You can also filter nested fields. For example, you could specify
   * `scheduling.automaticRestart = false` to include instances only if they are
   * not scheduled for automatic restarts. You can use filtering on nested fields
   * to filter based on resource labels. To filter on multiple expressions,
   * provide each separate expression within parentheses. For example: ```
   * (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By
   * default, each expression is an `AND` expression. However, you can include
   * `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel
   * Skylake") OR (cpuPlatform = "Intel Broadwell") AND
   * (scheduling.automaticRestart = true) ```
   * @opt_param string maxResults The maximum number of results per page that
   * should be returned. If the number of available results is larger than
   * `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
   * get the next page of results in subsequent list requests. Acceptable values
   * are `0` to `500`, inclusive. (Default: `500`)
   * @opt_param string orderBy Sorts list results by a certain order. By default,
   * results are returned in alphanumerical order based on the resource name. You
   * can also sort results in descending order based on the creation timestamp
   * using `orderBy="creationTimestamp desc"`. This sorts results based on the
   * `creationTimestamp` field in reverse chronological order (newest result
   * first). Use this to sort resources like operations so that the newest
   * operation is returned first. Currently, only sorting by `name` or
   * `creationTimestamp desc` is supported.
   * @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
   * the `nextPageToken` returned by a previous list request to get the next page
   * of results.
   * @opt_param bool returnPartialSuccess Opt-in for partial success behavior
   * which provides partial results in case of failure. The default value is
   * false.
   * @return InstanceGroupManagersListManagedInstancesResponse
   */
  public function listManagedInstances($project, $zone, $instanceGroupManager, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager];
    $params = array_merge($params, $optParams);
    return $this->call('listManagedInstances', [$params], InstanceGroupManagersListManagedInstancesResponse::class);
  }
  /**
   * Lists all of the per-instance configs defined for the managed instance group.
   * The orderBy query parameter is not supported.
   * (instanceGroupManagers.listPerInstanceConfigs)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone where the managed instance group is
   * located. It should conform to RFC1035.
   * @param string $instanceGroupManager The name of the managed instance group.
   * It should conform to RFC1035.
   * @param array $optParams Optional parameters.
   *
   * @opt_param string filter A filter expression that filters resources listed in
   * the response. The expression must specify the field name, an operator, and
   * the value that you want to use for filtering. The value must be a string, a
   * number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`,
   * `>=` or `:`. For example, if you are filtering Compute Engine instances, you
   * can exclude instances named `example-instance` by specifying `name !=
   * example-instance`. The `:` operator can be used with string fields to match
   * substrings. For non-string fields it is equivalent to the `=` operator. The
   * `:*` comparison can be used to test whether a key has been defined. For
   * example, to find all objects with `owner` label use: ``` labels.owner:* ```
   * You can also filter nested fields. For example, you could specify
   * `scheduling.automaticRestart = false` to include instances only if they are
   * not scheduled for automatic restarts. You can use filtering on nested fields
   * to filter based on resource labels. To filter on multiple expressions,
   * provide each separate expression within parentheses. For example: ```
   * (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By
   * default, each expression is an `AND` expression. However, you can include
   * `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel
   * Skylake") OR (cpuPlatform = "Intel Broadwell") AND
   * (scheduling.automaticRestart = true) ```
   * @opt_param string maxResults The maximum number of results per page that
   * should be returned. If the number of available results is larger than
   * `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
   * get the next page of results in subsequent list requests. Acceptable values
   * are `0` to `500`, inclusive. (Default: `500`)
   * @opt_param string orderBy Sorts list results by a certain order. By default,
   * results are returned in alphanumerical order based on the resource name. You
   * can also sort results in descending order based on the creation timestamp
   * using `orderBy="creationTimestamp desc"`. This sorts results based on the
   * `creationTimestamp` field in reverse chronological order (newest result
   * first). Use this to sort resources like operations so that the newest
   * operation is returned first. Currently, only sorting by `name` or
   * `creationTimestamp desc` is supported.
   * @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
   * the `nextPageToken` returned by a previous list request to get the next page
   * of results.
   * @opt_param bool returnPartialSuccess Opt-in for partial success behavior
   * which provides partial results in case of failure. The default value is
   * false.
   * @return InstanceGroupManagersListPerInstanceConfigsResp
   */
  public function listPerInstanceConfigs($project, $zone, $instanceGroupManager, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager];
    $params = array_merge($params, $optParams);
    return $this->call('listPerInstanceConfigs', [$params], InstanceGroupManagersListPerInstanceConfigsResp::class);
  }
  /**
   * Updates a managed instance group using the information that you specify in
   * the request. This operation is marked as DONE when the group is patched even
   * if the instances in the group are still in the process of being patched. You
   * must separately verify the status of the individual instances with the
   * listManagedInstances method. This method supports PATCH semantics and uses
   * the JSON merge patch format and processing rules. If you update your group to
   * specify a new template or instance configuration, it's possible that your
   * intended specification for each VM in the group is different from the current
   * state of that VM. To learn how to apply an updated configuration to the VMs
   * in a MIG, see Updating instances in a MIG. (instanceGroupManagers.patch)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone where you want to create the managed
   * instance group.
   * @param string $instanceGroupManager The name of the instance group manager.
   * @param InstanceGroupManager $postBody
   * @param array $optParams Optional parameters.
   *
   * @opt_param string requestId An optional request ID to identify requests.
   * Specify a unique request ID so that if you must retry your request, the
   * server will know to ignore the request if it has already been completed. For
   * example, consider a situation where you make an initial request and the
   * request times out. If you make the request again with the same request ID,
   * the server can check if original operation with the same request ID was
   * received, and if so, will ignore the second request. This prevents clients
   * from accidentally creating duplicate commitments. The request ID must be a
   * valid UUID with the exception that zero UUID is not supported (
   * 00000000-0000-0000-0000-000000000000).
   * @return Operation
   */
  public function patch($project, $zone, $instanceGroupManager, InstanceGroupManager $postBody, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody];
    $params = array_merge($params, $optParams);
    return $this->call('patch', [$params], Operation::class);
  }
  /**
   * Inserts or patches per-instance configs for the managed instance group.
   * perInstanceConfig.name serves as a key used to distinguish whether to perform
   * insert or patch. (instanceGroupManagers.patchPerInstanceConfigs)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone where the managed instance group is
   * located. It should conform to RFC1035.
   * @param string $instanceGroupManager The name of the managed instance group.
   * It should conform to RFC1035.
   * @param InstanceGroupManagersPatchPerInstanceConfigsReq $postBody
   * @param array $optParams Optional parameters.
   *
   * @opt_param string requestId An optional request ID to identify requests.
   * Specify a unique request ID so that if you must retry your request, the
   * server will know to ignore the request if it has already been completed. For
   * example, consider a situation where you make an initial request and the
   * request times out. If you make the request again with the same request ID,
   * the server can check if original operation with the same request ID was
   * received, and if so, will ignore the second request. This prevents clients
   * from accidentally creating duplicate commitments. The request ID must be a
   * valid UUID with the exception that zero UUID is not supported (
   * 00000000-0000-0000-0000-000000000000).
   * @return Operation
   */
  public function patchPerInstanceConfigs($project, $zone, $instanceGroupManager, InstanceGroupManagersPatchPerInstanceConfigsReq $postBody, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody];
    $params = array_merge($params, $optParams);
    return $this->call('patchPerInstanceConfigs', [$params], Operation::class);
  }
  /**
   * Flags the specified VM instances in the managed instance group to be
   * immediately recreated. Each instance is recreated using the group's current
   * configuration. This operation is marked as DONE when the flag is set even if
   * the instances have not yet been recreated. You must separately verify the
   * status of each instance by checking its currentAction field; for more
   * information, see Checking the status of managed instances. If the group is
   * part of a backend service that has enabled connection draining, it can take
   * up to 60 seconds after the connection draining duration has elapsed before
   * the VM instance is removed or deleted. You can specify a maximum of 1000
   * instances with this method per request.
   * (instanceGroupManagers.recreateInstances)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone where the managed instance group is
   * located.
   * @param string $instanceGroupManager The name of the managed instance group.
   * @param InstanceGroupManagersRecreateInstancesRequest $postBody
   * @param array $optParams Optional parameters.
   *
   * @opt_param string requestId An optional request ID to identify requests.
   * Specify a unique request ID so that if you must retry your request, the
   * server will know to ignore the request if it has already been completed. For
   * example, consider a situation where you make an initial request and the
   * request times out. If you make the request again with the same request ID,
   * the server can check if original operation with the same request ID was
   * received, and if so, will ignore the second request. This prevents clients
   * from accidentally creating duplicate commitments. The request ID must be a
   * valid UUID with the exception that zero UUID is not supported (
   * 00000000-0000-0000-0000-000000000000).
   * @return Operation
   */
  public function recreateInstances($project, $zone, $instanceGroupManager, InstanceGroupManagersRecreateInstancesRequest $postBody, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody];
    $params = array_merge($params, $optParams);
    return $this->call('recreateInstances', [$params], Operation::class);
  }
  /**
   * Resizes the managed instance group. If you increase the size, the group
   * creates new instances using the current instance template. If you decrease
   * the size, the group deletes instances. The resize operation is marked DONE
   * when the resize actions are scheduled even if the group has not yet added or
   * deleted any instances. You must separately verify the status of the creating
   * or deleting actions with the listmanagedinstances method. When resizing down,
   * the instance group arbitrarily chooses the order in which VMs are deleted.
   * The group takes into account some VM attributes when making the selection
   * including: + The status of the VM instance. + The health of the VM instance.
   * + The instance template version the VM is based on. + For regional managed
   * instance groups, the location of the VM instance. This list is subject to
   * change. If the group is part of a backend service that has enabled connection
   * draining, it can take up to 60 seconds after the connection draining duration
   * has elapsed before the VM instance is removed or deleted.
   * (instanceGroupManagers.resize)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone where the managed instance group is
   * located.
   * @param string $instanceGroupManager The name of the managed instance group.
   * @param int $size The number of running instances that the managed instance
   * group should maintain at any given time. The group automatically adds or
   * removes instances to maintain the number of instances specified by this
   * parameter.
   * @param array $optParams Optional parameters.
   *
   * @opt_param string requestId An optional request ID to identify requests.
   * Specify a unique request ID so that if you must retry your request, the
   * server will know to ignore the request if it has already been completed. For
   * example, consider a situation where you make an initial request and the
   * request times out. If you make the request again with the same request ID,
   * the server can check if original operation with the same request ID was
   * received, and if so, will ignore the second request. This prevents clients
   * from accidentally creating duplicate commitments. The request ID must be a
   * valid UUID with the exception that zero UUID is not supported (
   * 00000000-0000-0000-0000-000000000000).
   * @return Operation
   */
  public function resize($project, $zone, $instanceGroupManager, $size, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'size' => $size];
    $params = array_merge($params, $optParams);
    return $this->call('resize', [$params], Operation::class);
  }
  /**
   * Specifies the instance template to use when creating new instances in this
   * group. The templates for existing instances in the group do not change unless
   * you run recreateInstances, run applyUpdatesToInstances, or set the group's
   * updatePolicy.type to PROACTIVE. (instanceGroupManagers.setInstanceTemplate)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone where the managed instance group is
   * located.
   * @param string $instanceGroupManager The name of the managed instance group.
   * @param InstanceGroupManagersSetInstanceTemplateRequest $postBody
   * @param array $optParams Optional parameters.
   *
   * @opt_param string requestId An optional request ID to identify requests.
   * Specify a unique request ID so that if you must retry your request, the
   * server will know to ignore the request if it has already been completed. For
   * example, consider a situation where you make an initial request and the
   * request times out. If you make the request again with the same request ID,
   * the server can check if original operation with the same request ID was
   * received, and if so, will ignore the second request. This prevents clients
   * from accidentally creating duplicate commitments. The request ID must be a
   * valid UUID with the exception that zero UUID is not supported (
   * 00000000-0000-0000-0000-000000000000).
   * @return Operation
   */
  public function setInstanceTemplate($project, $zone, $instanceGroupManager, InstanceGroupManagersSetInstanceTemplateRequest $postBody, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody];
    $params = array_merge($params, $optParams);
    return $this->call('setInstanceTemplate', [$params], Operation::class);
  }
  /**
   * Modifies the target pools to which all instances in this managed instance
   * group are assigned. The target pools automatically apply to all of the
   * instances in the managed instance group. This operation is marked DONE when
   * you make the request even if the instances have not yet been added to their
   * target pools. The change might take some time to apply to all of the
   * instances in the group depending on the size of the group.
   * (instanceGroupManagers.setTargetPools)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone where the managed instance group is
   * located.
   * @param string $instanceGroupManager The name of the managed instance group.
   * @param InstanceGroupManagersSetTargetPoolsRequest $postBody
   * @param array $optParams Optional parameters.
   *
   * @opt_param string requestId An optional request ID to identify requests.
   * Specify a unique request ID so that if you must retry your request, the
   * server will know to ignore the request if it has already been completed. For
   * example, consider a situation where you make an initial request and the
   * request times out. If you make the request again with the same request ID,
   * the server can check if original operation with the same request ID was
   * received, and if so, will ignore the second request. This prevents clients
   * from accidentally creating duplicate commitments. The request ID must be a
   * valid UUID with the exception that zero UUID is not supported (
   * 00000000-0000-0000-0000-000000000000).
   * @return Operation
   */
  public function setTargetPools($project, $zone, $instanceGroupManager, InstanceGroupManagersSetTargetPoolsRequest $postBody, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody];
    $params = array_merge($params, $optParams);
    return $this->call('setTargetPools', [$params], Operation::class);
  }
  /**
   * Inserts or updates per-instance configs for the managed instance group.
   * perInstanceConfig.name serves as a key used to distinguish whether to perform
   * insert or patch. (instanceGroupManagers.updatePerInstanceConfigs)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone where the managed instance group is
   * located. It should conform to RFC1035.
   * @param string $instanceGroupManager The name of the managed instance group.
   * It should conform to RFC1035.
   * @param InstanceGroupManagersUpdatePerInstanceConfigsReq $postBody
   * @param array $optParams Optional parameters.
   *
   * @opt_param string requestId An optional request ID to identify requests.
   * Specify a unique request ID so that if you must retry your request, the
   * server will know to ignore the request if it has already been completed. For
   * example, consider a situation where you make an initial request and the
   * request times out. If you make the request again with the same request ID,
   * the server can check if original operation with the same request ID was
   * received, and if so, will ignore the second request. This prevents clients
   * from accidentally creating duplicate commitments. The request ID must be a
   * valid UUID with the exception that zero UUID is not supported (
   * 00000000-0000-0000-0000-000000000000).
   * @return Operation
   */
  public function updatePerInstanceConfigs($project, $zone, $instanceGroupManager, InstanceGroupManagersUpdatePerInstanceConfigsReq $postBody, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody];
    $params = array_merge($params, $optParams);
    return $this->call('updatePerInstanceConfigs', [$params], Operation::class);
  }
}

// Adding a class alias for backwards compatibility with the previous class name.
class_alias(InstanceGroupManagers::class, 'Google_Service_Compute_Resource_InstanceGroupManagers');

cmd: