/
usr
/
share
/
vim
/
vim81
/
pack
/
dist
/
opt
/
termdebug
/
plugin
/
/usr/share/vim/vim81/pack/dist/opt/termdebug/plugin
mkdir
upload
Name
Size
Mode
Actions
termdebug.vim
30541
0644
edit
dl
rm
Edit:
/usr/share/vim/vim81/pack/dist/opt/termdebug/plugin/termdebug.vim
(30541B)
" Debugger plugin using gdb. " " Author: Bram Moolenaar " Copyright: Vim license applies, see ":help license" " Last Update: 2018 Jun 3 " " WORK IN PROGRESS - Only the basics work " Note: On MS-Windows you need a recent version of gdb. The one included with " MingW is too old (7.6.1). " I used version 7.12 from http://www.equation.com/servlet/equation.cmd?fa=gdb " " There are two ways to run gdb: " - In a terminal window; used if possible, does not work on MS-Windows " Not used when g:termdebug_use_prompt is set to 1. " - Using a "prompt" buffer; may use a terminal window for the program " " For both the current window is used to view source code and shows the " current statement from gdb. " " USING A TERMINAL WINDOW " " Opens two visible terminal windows: " 1. runs a pty for the debugged program, as with ":term NONE" " 2. runs gdb, passing the pty of the debugged program " A third terminal window is hidden, it is used for communication with gdb. " " USING A PROMPT BUFFER " " Opens a window with a prompt buffer to communicate with gdb. " Gdb is run as a job with callbacks for I/O. " On Unix another terminal window is opened to run the debugged program " On MS-Windows a separate console is opened to run the debugged program " " The communication with gdb uses GDB/MI. See: " https://sourceware.org/gdb/current/onlinedocs/gdb/GDB_002fMI.html " In case this gets sourced twice. if exists(':Termdebug') finish endif " Need either the +terminal feature or +channel and the prompt buffer. " The terminal feature does not work with gdb on win32. if has('terminal') && !has('win32') let s:way = 'terminal' elseif has('channel') && exists('*prompt_setprompt') let s:way = 'prompt' else if has('terminal') let s:err = 'Cannot debug, missing prompt buffer support' else let s:err = 'Cannot debug, +channel feature is not supported' endif command -nargs=* -complete=file -bang Termdebug echoerr s:err command -nargs=+ -complete=file -bang TermdebugCommand echoerr s:err finish endif let s:keepcpo = &cpo set cpo&vim " The command that starts debugging, e.g. ":Termdebug vim". " To end type "quit" in the gdb window. command -nargs=* -complete=file -bang Termdebug call s:StartDebug(<bang>0, <f-args>) command -nargs=+ -complete=file -bang TermdebugCommand call s:StartDebugCommand(<bang>0, <f-args>) " Name of the gdb command, defaults to "gdb". if !exists('g:termdebugger') let g:termdebugger = 'gdb' endif let s:pc_id = 12 let s:break_id = 13 " breakpoint number is added to this let s:stopped = 1 " Take a breakpoint number as used by GDB and turn it into an integer. " The breakpoint may contain a dot: 123.4 -> 123004 " The main breakpoint has a zero subid. func s:Breakpoint2SignNumber(id, subid) return s:break_id + a:id * 1000 + a:subid endfunction func s:Highlight(init, old, new) let default = a:init ? 'default ' : '' if a:new ==# 'light' && a:old !=# 'light' exe "hi " . default . "debugPC term=reverse ctermbg=lightblue guibg=lightblue" elseif a:new ==# 'dark' && a:old !=# 'dark' exe "hi " . default . "debugPC term=reverse ctermbg=darkblue guibg=darkblue" endif endfunc call s:Highlight(1, '', &background) hi default debugBreakpoint term=reverse ctermbg=red guibg=red func s:StartDebug(bang, ...) " First argument is the command to debug, second core file or process ID. call s:StartDebug_internal({'gdb_args': a:000, 'bang': a:bang}) endfunc func s:StartDebugCommand(bang, ...) " First argument is the command to debug, rest are run arguments. call s:StartDebug_internal({'gdb_args': [a:1], 'proc_args': a:000[1:], 'bang': a:bang}) endfunc func s:StartDebug_internal(dict) if exists('s:gdbwin') echoerr 'Terminal debugger already running, cannot run two' return endif if !executable(g:termdebugger) echoerr 'Cannot execute debugger program "' .. g:termdebugger .. '"' return endif let s:ptywin = 0 let s:pid = 0 " Uncomment this line to write logging in "debuglog". " call ch_logfile('debuglog', 'w') let s:sourcewin = win_getid(winnr()) let s:startsigncolumn = &signcolumn let s:save_columns = 0 let s:allleft = 0 if exists('g:termdebug_wide') if &columns < g:termdebug_wide let s:save_columns = &columns let &columns = g:termdebug_wide " If we make the Vim window wider, use the whole left halve for the debug " windows. let s:allleft = 1 endif let s:vertical = 1 else let s:vertical = 0 endif " Override using a terminal window by setting g:termdebug_use_prompt to 1. let use_prompt = exists('g:termdebug_use_prompt') && g:termdebug_use_prompt if has('terminal') && !has('win32') && !use_prompt let s:way = 'terminal' else let s:way = 'prompt' endif if s:way == 'prompt' call s:StartDebug_prompt(a:dict) else call s:StartDebug_term(a:dict) endif endfunc " Use when debugger didn't start or ended. func s:CloseBuffers() exe 'bwipe! ' . s:ptybuf exe 'bwipe! ' . s:commbuf unlet! s:gdbwin endfunc func s:StartDebug_term(dict) " Open a terminal window without a job, to run the debugged program in. let s:ptybuf = term_start('NONE', { \ 'term_name': 'debugged program', \ 'vertical': s:vertical, \ }) if s:ptybuf == 0 echoerr 'Failed to open the program terminal window' return endif let pty = job_info(term_getjob(s:ptybuf))['tty_out'] let s:ptywin = win_getid(winnr()) if s:vertical " Assuming the source code window will get a signcolumn, use two more " columns for that, thus one less for the terminal window. exe (&columns / 2 - 1) . "wincmd |" if s:allleft " use the whole left column wincmd H endif endif " Create a hidden terminal window to communicate with gdb let s:commbuf = term_start('NONE', { \ 'term_name': 'gdb communication', \ 'out_cb': function('s:CommOutput'), \ 'hidden': 1, \ }) if s:commbuf == 0 echoerr 'Failed to open the communication terminal window' exe 'bwipe! ' . s:ptybuf return endif let commpty = job_info(term_getjob(s:commbuf))['tty_out'] " Open a terminal window to run the debugger. " Add -quiet to avoid the intro message causing a hit-enter prompt. let gdb_args = get(a:dict, 'gdb_args', []) let proc_args = get(a:dict, 'proc_args', []) let cmd = [g:termdebugger, '-quiet', '-tty', pty] + gdb_args call ch_log('executing "' . join(cmd) . '"') let s:gdbbuf = term_start(cmd, { \ 'term_finish': 'close', \ }) if s:gdbbuf == 0 echoerr 'Failed to open the gdb terminal window' call s:CloseBuffers() return endif let s:gdbwin = win_getid(winnr()) " Set arguments to be run if len(proc_args) call term_sendkeys(s:gdbbuf, 'set args ' . join(proc_args) . "\r") endif " Connect gdb to the communication pty, using the GDB/MI interface call term_sendkeys(s:gdbbuf, 'new-ui mi ' . commpty . "\r") " Wait for the response to show up, users may not notice the error and wonder " why the debugger doesn't work. let try_count = 0 while 1 let gdbproc = term_getjob(s:gdbbuf) if gdbproc == v:null || job_status(gdbproc) !=# 'run' echoerr string(g:termdebugger) . ' exited unexpectedly' call s:CloseBuffers() return endif let response = '' for lnum in range(1, 200) let line1 = term_getline(s:gdbbuf, lnum) let line2 = term_getline(s:gdbbuf, lnum + 1) if line1 =~ 'new-ui mi ' " response can be in the same line or the next line let response = line1 . line2 if response =~ 'Undefined command' echoerr 'Sorry, your gdb is too old, gdb 7.12 is required' call s:CloseBuffers() return endif if response =~ 'New UI allocated' " Success! break endif elseif line1 =~ 'Reading symbols from' && line2 !~ 'new-ui mi ' " Reading symbols might take a while, try more times let try_count -= 1 endif endfor if response =~ 'New UI allocated' break endif let try_count += 1 if try_count > 100 echoerr 'Cannot check if your gdb works, continuing anyway' break endif sleep 10m endwhile " Interpret commands while the target is running. This should usualy only be " exec-interrupt, since many commands don't work properly while the target is " running. call s:SendCommand('-gdb-set mi-async on') " Older gdb uses a different command. call s:SendCommand('-gdb-set target-async on') " Disable pagination, it causes everything to stop at the gdb " "Type <return> to continue" prompt. call s:SendCommand('set pagination off') call job_setoptions(gdbproc, {'exit_cb': function('s:EndTermDebug')}) call s:StartDebugCommon(a:dict) endfunc func s:StartDebug_prompt(dict) " Open a window with a prompt buffer to run gdb in. if s:vertical vertical new else new endif let s:gdbwin = win_getid(winnr()) let s:promptbuf = bufnr('') call prompt_setprompt(s:promptbuf, 'gdb> ') set buftype=prompt file gdb call prompt_setcallback(s:promptbuf, function('s:PromptCallback')) call prompt_setinterrupt(s:promptbuf, function('s:PromptInterrupt')) if s:vertical " Assuming the source code window will get a signcolumn, use two more " columns for that, thus one less for the terminal window. exe (&columns / 2 - 1) . "wincmd |" endif " Add -quiet to avoid the intro message causing a hit-enter prompt. let gdb_args = get(a:dict, 'gdb_args', []) let proc_args = get(a:dict, 'proc_args', []) let cmd = [g:termdebugger, '-quiet', '--interpreter=mi2'] + gdb_args call ch_log('executing "' . join(cmd) . '"') let s:gdbjob = job_start(cmd, { \ 'exit_cb': function('s:EndPromptDebug'), \ 'out_cb': function('s:GdbOutCallback'), \ }) if job_status(s:gdbjob) != "run" echoerr 'Failed to start gdb' exe 'bwipe! ' . s:promptbuf return endif " Mark the buffer modified so that it's not easy to close. set modified let s:gdb_channel = job_getchannel(s:gdbjob) " Interpret commands while the target is running. This should usualy only " be exec-interrupt, since many commands don't work properly while the " target is running. call s:SendCommand('-gdb-set mi-async on') " Older gdb uses a different command. call s:SendCommand('-gdb-set target-async on') let s:ptybuf = 0 if has('win32') " MS-Windows: run in a new console window for maximum compatibility call s:SendCommand('set new-console on') elseif has('terminal') " Unix: Run the debugged program in a terminal window. Open it below the " gdb window. belowright let s:ptybuf = term_start('NONE', { \ 'term_name': 'debugged program', \ }) if s:ptybuf == 0 echoerr 'Failed to open the program terminal window' call job_stop(s:gdbjob) return endif let s:ptywin = win_getid(winnr()) let pty = job_info(term_getjob(s:ptybuf))['tty_out'] call s:SendCommand('tty ' . pty) " Since GDB runs in a prompt window, the environment has not been set to " match a terminal window, need to do that now. call s:SendCommand('set env TERM = xterm-color') call s:SendCommand('set env ROWS = ' . winheight(s:ptywin)) call s:SendCommand('set env LINES = ' . winheight(s:ptywin)) call s:SendCommand('set env COLUMNS = ' . winwidth(s:ptywin)) call s:SendCommand('set env COLORS = ' . &t_Co) call s:SendCommand('set env VIM_TERMINAL = ' . v:version) else " TODO: open a new terminal get get the tty name, pass on to gdb call s:SendCommand('show inferior-tty') endif call s:SendCommand('set print pretty on') call s:SendCommand('set breakpoint pending on') " Disable pagination, it causes everything to stop at the gdb call s:SendCommand('set pagination off') " Set arguments to be run if len(proc_args) call s:SendCommand('set args ' . join(proc_args)) endif call s:StartDebugCommon(a:dict) startinsert endfunc func s:StartDebugCommon(dict) " Sign used to highlight the line where the program has stopped. " There can be only one. sign define debugPC linehl=debugPC " Install debugger commands in the text window. call win_gotoid(s:sourcewin) call s:InstallCommands() call win_gotoid(s:gdbwin) " Enable showing a balloon with eval info if has("balloon_eval") || has("balloon_eval_term") set balloonexpr=TermDebugBalloonExpr() if has("balloon_eval") set ballooneval endif if has("balloon_eval_term") set balloonevalterm endif endif " Contains breakpoints that have been placed, key is a string with the GDB " breakpoint number. " Each entry is a dict, containing the sub-breakpoints. Key is the subid. " For a breakpoint that is just a number the subid is zero. " For a breakpoint "123.4" the id is "123" and subid is "4". " Example, when breakpoint "44", "123", "123.1" and "123.2" exist: " {'44': {'0': entry}, '123': {'0': entry, '1': entry, '2': entry}} let s:breakpoints = {} " Contains breakpoints by file/lnum. The key is "fname:lnum". " Each entry is a list of breakpoint IDs at that position. let s:breakpoint_locations = {} augroup TermDebug au BufRead * call s:BufRead() au BufUnload * call s:BufUnloaded() au OptionSet background call s:Highlight(0, v:option_old, v:option_new) augroup END " Run the command if the bang attribute was given and got to the debug " window. if get(a:dict, 'bang', 0) call s:SendCommand('-exec-run') call win_gotoid(s:ptywin) endif endfunc " Send a command to gdb. "cmd" is the string without line terminator. func s:SendCommand(cmd) call ch_log('sending to gdb: ' . a:cmd) if s:way == 'prompt' call ch_sendraw(s:gdb_channel, a:cmd . "\n") else call term_sendkeys(s:commbuf, a:cmd . "\r") endif endfunc " This is global so that a user can create their mappings with this. func TermDebugSendCommand(cmd) if s:way == 'prompt' call ch_sendraw(s:gdb_channel, a:cmd . "\n") else let do_continue = 0 if !s:stopped let do_continue = 1 call s:SendCommand('-exec-interrupt') sleep 10m endif call term_sendkeys(s:gdbbuf, a:cmd . "\r") if do_continue Continue endif endif endfunc " Function called when entering a line in the prompt buffer. func s:PromptCallback(text) call s:SendCommand(a:text) endfunc " Function called when pressing CTRL-C in the prompt buffer and when placing a " breakpoint. func s:PromptInterrupt() call ch_log('Interrupting gdb') if has('win32') " Using job_stop() does not work on MS-Windows, need to send SIGTRAP to " the debugger program so that gdb responds again. if s:pid == 0 echoerr 'Cannot interrupt gdb, did not find a process ID' else call debugbreak(s:pid) endif else call job_stop(s:gdbjob, 'int') endif endfunc " Function called when gdb outputs text. func s:GdbOutCallback(channel, text) call ch_log('received from gdb: ' . a:text) " Drop the gdb prompt, we have our own. " Drop status and echo'd commands. if a:text == '(gdb) ' || a:text == '^done' || a:text[0] == '&' return endif if a:text =~ '^^error,msg=' let text = s:DecodeMessage(a:text[11:]) if exists('s:evalexpr') && text =~ 'A syntax error in expression, near\|No symbol .* in current context' " Silently drop evaluation errors. unlet s:evalexpr return endif elseif a:text[0] == '~' let text = s:DecodeMessage(a:text[1:]) else call s:CommOutput(a:channel, a:text) return endif let curwinid = win_getid(winnr()) call win_gotoid(s:gdbwin) " Add the output above the current prompt. call append(line('$') - 1, text) set modified call win_gotoid(curwinid) endfunc " Decode a message from gdb. quotedText starts with a ", return the text up " to the next ", unescaping characters. func s:DecodeMessage(quotedText) if a:quotedText[0] != '"' echoerr 'DecodeMessage(): missing quote in ' . a:quotedText return endif let result = '' let i = 1 while a:quotedText[i] != '"' && i < len(a:quotedText) if a:quotedText[i] == '\' let i += 1 if a:quotedText[i] == 'n' " drop \n let i += 1 continue elseif a:quotedText[i] == 't' " append \t let i += 1 let result .= "\t" continue endif endif let result .= a:quotedText[i] let i += 1 endwhile return result endfunc " Extract the "name" value from a gdb message with fullname="name". func s:GetFullname(msg) if a:msg !~ 'fullname' return '' endif let name = s:DecodeMessage(substitute(a:msg, '.*fullname=', '', '')) if has('win32') && name =~ ':\\\\' " sometimes the name arrives double-escaped let name = substitute(name, '\\\\', '\\', 'g') endif return name endfunc func s:EndTermDebug(job, status) exe 'bwipe! ' . s:commbuf unlet s:gdbwin call s:EndDebugCommon() endfunc func s:EndDebugCommon() let curwinid = win_getid(winnr()) if exists('s:ptybuf') && s:ptybuf exe 'bwipe! ' . s:ptybuf endif call win_gotoid(s:sourcewin) let &signcolumn = s:startsigncolumn call s:DeleteCommands() call win_gotoid(curwinid) if s:save_columns > 0 let &columns = s:save_columns endif if has("balloon_eval") || has("balloon_eval_term") set balloonexpr= if has("balloon_eval") set noballooneval endif if has("balloon_eval_term") set noballoonevalterm endif endif au! TermDebug endfunc func s:EndPromptDebug(job, status) let curwinid = win_getid(winnr()) call win_gotoid(s:gdbwin) set nomodified close if curwinid != s:gdbwin call win_gotoid(curwinid) endif call s:EndDebugCommon() unlet s:gdbwin call ch_log("Returning from EndPromptDebug()") endfunc " Handle a message received from gdb on the GDB/MI interface. func s:CommOutput(chan, msg) let msgs = split(a:msg, "\r") for msg in msgs " remove prefixed NL if msg[0] == "\n" let msg = msg[1:] endif if msg != '' if msg =~ '^\(\*stopped\|\*running\|=thread-selected\)' call s:HandleCursor(msg) elseif msg =~ '^\^done,bkpt=' || msg =~ '^=breakpoint-created,' call s:HandleNewBreakpoint(msg) elseif msg =~ '^=breakpoint-deleted,' call s:HandleBreakpointDelete(msg) elseif msg =~ '^=thread-group-started' call s:HandleProgramRun(msg) elseif msg =~ '^\^done,value=' call s:HandleEvaluate(msg) elseif msg =~ '^\^error,msg=' call s:HandleError(msg) endif endif endfor endfunc func s:GotoProgram() if has('win32') if executable('powershell') call system(printf('powershell -Command "add-type -AssemblyName microsoft.VisualBasic;[Microsoft.VisualBasic.Interaction]::AppActivate(%d);"', s:pid)) endif else win_gotoid(s:ptywin) endif endfunc " Install commands in the current window to control the debugger. func s:InstallCommands() let save_cpo = &cpo set cpo&vim command -nargs=? Break call s:SetBreakpoint(<q-args>) command Clear call s:ClearBreakpoint() command Step call s:SendCommand('-exec-step') command Over call s:SendCommand('-exec-next') command Finish call s:SendCommand('-exec-finish') command -nargs=* Run call s:Run(<q-args>) command -nargs=* Arguments call s:SendCommand('-exec-arguments ' . <q-args>) command Stop call s:SendCommand('-exec-interrupt') " using -exec-continue results in CTRL-C in gdb window not working if s:way == 'prompt' command Continue call s:SendCommand('continue') else command Continue call term_sendkeys(s:gdbbuf, "continue\r") endif command -range -nargs=* Evaluate call s:Evaluate(<range>, <q-args>) command Gdb call win_gotoid(s:gdbwin) command Program call s:GotoProgram() command Source call s:GotoSourcewinOrCreateIt() command Winbar call s:InstallWinbar() " TODO: can the K mapping be restored? nnoremap K :Evaluate<CR> if has('menu') && &mouse != '' call s:InstallWinbar() if !exists('g:termdebug_popup') || g:termdebug_popup != 0 let s:saved_mousemodel = &mousemodel let &mousemodel = 'popup_setpos' an 1.200 PopUp.-SEP3- <Nop> an 1.210 PopUp.Set\ breakpoint :Break<CR> an 1.220 PopUp.Clear\ breakpoint :Clear<CR> an 1.230 PopUp.Evaluate :Evaluate<CR> endif endif let &cpo = save_cpo endfunc let s:winbar_winids = [] " Install the window toolbar in the current window. func s:InstallWinbar() if has('menu') && &mouse != '' nnoremenu WinBar.Step :Step<CR> nnoremenu WinBar.Next :Over<CR> nnoremenu WinBar.Finish :Finish<CR> nnoremenu WinBar.Cont :Continue<CR> nnoremenu WinBar.Stop :Stop<CR> nnoremenu WinBar.Eval :Evaluate<CR> call add(s:winbar_winids, win_getid(winnr())) endif endfunc " Delete installed debugger commands in the current window. func s:DeleteCommands() delcommand Break delcommand Clear delcommand Step delcommand Over delcommand Finish delcommand Run delcommand Arguments delcommand Stop delcommand Continue delcommand Evaluate delcommand Gdb delcommand Program delcommand Source delcommand Winbar nunmap K if has('menu') " Remove the WinBar entries from all windows where it was added. let curwinid = win_getid(winnr()) for winid in s:winbar_winids if win_gotoid(winid) aunmenu WinBar.Step aunmenu WinBar.Next aunmenu WinBar.Finish aunmenu WinBar.Cont aunmenu WinBar.Stop aunmenu WinBar.Eval endif endfor call win_gotoid(curwinid) let s:winbar_winids = [] if exists('s:saved_mousemodel') let &mousemodel = s:saved_mousemodel unlet s:saved_mousemodel aunmenu PopUp.-SEP3- aunmenu PopUp.Set\ breakpoint aunmenu PopUp.Clear\ breakpoint aunmenu PopUp.Evaluate endif endif exe 'sign unplace ' . s:pc_id for [id, entries] in items(s:breakpoints) for subid in keys(entries) exe 'sign unplace ' . s:Breakpoint2SignNumber(id, subid) endfor endfor unlet s:breakpoints unlet s:breakpoint_locations sign undefine debugPC for val in s:BreakpointSigns exe "sign undefine debugBreakpoint" . val endfor let s:BreakpointSigns = [] endfunc " :Break - Set a breakpoint at the cursor position. func s:SetBreakpoint(at) " Setting a breakpoint may not work while the program is running. " Interrupt to make it work. let do_continue = 0 if !s:stopped let do_continue = 1 if s:way == 'prompt' call s:PromptInterrupt() else call s:SendCommand('-exec-interrupt') endif sleep 10m endif " Use the fname:lnum format, older gdb can't handle --source. let at = empty(a:at) ? \ fnameescape(expand('%:p')) . ':' . line('.') : a:at call s:SendCommand('-break-insert ' . at) if do_continue call s:SendCommand('-exec-continue') endif endfunc " :Clear - Delete a breakpoint at the cursor position. func s:ClearBreakpoint() let fname = fnameescape(expand('%:p')) let lnum = line('.') let bploc = printf('%s:%d', fname, lnum) if has_key(s:breakpoint_locations, bploc) let idx = 0 for id in s:breakpoint_locations[bploc] if has_key(s:breakpoints, id) " Assume this always works, the reply is simply "^done". call s:SendCommand('-break-delete ' . id) for subid in keys(s:breakpoints[id]) exe 'sign unplace ' . s:Breakpoint2SignNumber(id, subid) endfor unlet s:breakpoints[id] unlet s:breakpoint_locations[bploc][idx] break else let idx += 1 endif endfor if empty(s:breakpoint_locations[bploc]) unlet s:breakpoint_locations[bploc] endif endif endfunc func s:Run(args) if a:args != '' call s:SendCommand('-exec-arguments ' . a:args) endif call s:SendCommand('-exec-run') endfunc func s:SendEval(expr) call s:SendCommand('-data-evaluate-expression "' . a:expr . '"') let s:evalexpr = a:expr endfunc " :Evaluate - evaluate what is under the cursor func s:Evaluate(range, arg) if a:arg != '' let expr = a:arg elseif a:range == 2 let pos = getcurpos() let reg = getreg('v', 1, 1) let regt = getregtype('v') normal! gv"vy let expr = @v call setpos('.', pos) call setreg('v', reg, regt) else let expr = expand('<cexpr>') endif let s:ignoreEvalError = 0 call s:SendEval(expr) endfunc let s:ignoreEvalError = 0 let s:evalFromBalloonExpr = 0 " Handle the result of data-evaluate-expression func s:HandleEvaluate(msg) let value = substitute(a:msg, '.*value="\(.*\)"', '\1', '') let value = substitute(value, '\\"', '"', 'g') if s:evalFromBalloonExpr if s:evalFromBalloonExprResult == '' let s:evalFromBalloonExprResult = s:evalexpr . ': ' . value else let s:evalFromBalloonExprResult .= ' = ' . value endif call balloon_show(s:evalFromBalloonExprResult) else echomsg '"' . s:evalexpr . '": ' . value endif if s:evalexpr[0] != '*' && value =~ '^0x' && value != '0x0' && value !~ '"$' " Looks like a pointer, also display what it points to. let s:ignoreEvalError = 1 call s:SendEval('*' . s:evalexpr) else let s:evalFromBalloonExpr = 0 endif endfunc " Show a balloon with information of the variable under the mouse pointer, " if there is any. func TermDebugBalloonExpr() if v:beval_winid != s:sourcewin return '' endif if !s:stopped " Only evaluate when stopped, otherwise setting a breakpoint using the " mouse triggers a balloon. return '' endif let s:evalFromBalloonExpr = 1 let s:evalFromBalloonExprResult = '' let s:ignoreEvalError = 1 call s:SendEval(v:beval_text) return '' endfunc " Handle an error. func s:HandleError(msg) if s:ignoreEvalError " Result of s:SendEval() failed, ignore. let s:ignoreEvalError = 0 let s:evalFromBalloonExpr = 0 return endif echoerr substitute(a:msg, '.*msg="\(.*\)"', '\1', '') endfunc func s:GotoSourcewinOrCreateIt() if !win_gotoid(s:sourcewin) new let s:sourcewin = win_getid(winnr()) call s:InstallWinbar() endif endfunc " Handle stopping and running message from gdb. " Will update the sign that shows the current position. func s:HandleCursor(msg) let wid = win_getid(winnr()) if a:msg =~ '^\*stopped' call ch_log('program stopped') let s:stopped = 1 elseif a:msg =~ '^\*running' call ch_log('program running') let s:stopped = 0 endif if a:msg =~ 'fullname=' let fname = s:GetFullname(a:msg) else let fname = '' endif if a:msg =~ '^\(\*stopped\|=thread-selected\)' && filereadable(fname) let lnum = substitute(a:msg, '.*line="\([^"]*\)".*', '\1', '') if lnum =~ '^[0-9]*$' call s:GotoSourcewinOrCreateIt() if expand('%:p') != fnamemodify(fname, ':p') if &modified " TODO: find existing window exe 'split ' . fnameescape(fname) let s:sourcewin = win_getid(winnr()) call s:InstallWinbar() else exe 'edit ' . fnameescape(fname) endif endif exe lnum exe 'sign unplace ' . s:pc_id exe 'sign place ' . s:pc_id . ' line=' . lnum . ' name=debugPC file=' . fname setlocal signcolumn=yes endif elseif !s:stopped || fname != '' exe 'sign unplace ' . s:pc_id endif call win_gotoid(wid) endfunc let s:BreakpointSigns = [] func s:CreateBreakpoint(id, subid) let nr = printf('%d.%d', a:id, a:subid) if index(s:BreakpointSigns, nr) == -1 call add(s:BreakpointSigns, nr) exe "sign define debugBreakpoint" . nr . " text=" . substitute(nr, '\..*', '', '') . " texthl=debugBreakpoint" endif endfunc func! s:SplitMsg(s) return split(a:s, '{.\{-}}\zs') endfunction " Handle setting a breakpoint " Will update the sign that shows the breakpoint func s:HandleNewBreakpoint(msg) if a:msg !~ 'fullname=' " a watch does not have a file name return endif for msg in s:SplitMsg(a:msg) let fname = s:GetFullname(msg) if empty(fname) continue endif let nr = substitute(msg, '.*number="\([0-9.]*\)\".*', '\1', '') if empty(nr) return endif " If "nr" is 123 it becomes "123.0" and subid is "0". " If "nr" is 123.4 it becomes "123.4.0" and subid is "4"; "0" is discarded. let [id, subid; _] = map(split(nr . '.0', '\.'), 'v:val + 0') call s:CreateBreakpoint(id, subid) if has_key(s:breakpoints, id) let entries = s:breakpoints[id] else let entries = {} let s:breakpoints[id] = entries endif if has_key(entries, subid) let entry = entries[subid] else let entry = {} let entries[subid] = entry endif let lnum = substitute(msg, '.*line="\([^"]*\)".*', '\1', '') let entry['fname'] = fname let entry['lnum'] = lnum let bploc = printf('%s:%d', fname, lnum) if !has_key(s:breakpoint_locations, bploc) let s:breakpoint_locations[bploc] = [] endif let s:breakpoint_locations[bploc] += [id] if bufloaded(fname) call s:PlaceSign(id, subid, entry) endif endfor endfunc func s:PlaceSign(id, subid, entry) let nr = printf('%d.%d', a:id, a:subid) exe 'sign place ' . s:Breakpoint2SignNumber(a:id, a:subid) . ' line=' . a:entry['lnum'] . ' name=debugBreakpoint' . nr . ' file=' . a:entry['fname'] let a:entry['placed'] = 1 endfunc " Handle deleting a breakpoint " Will remove the sign that shows the breakpoint func s:HandleBreakpointDelete(msg) let id = substitute(a:msg, '.*id="\([0-9]*\)\".*', '\1', '') + 0 if empty(id) return endif if has_key(s:breakpoints, id) for [subid, entry] in items(s:breakpoints[id]) if has_key(entry, 'placed') exe 'sign unplace ' . s:Breakpoint2SignNumber(id, subid) unlet entry['placed'] endif endfor unlet s:breakpoints[id] endif endfunc " Handle the debugged program starting to run. " Will store the process ID in s:pid func s:HandleProgramRun(msg) let nr = substitute(a:msg, '.*pid="\([0-9]*\)\".*', '\1', '') + 0 if nr == 0 return endif let s:pid = nr call ch_log('Detected process ID: ' . s:pid) endfunc " Handle a BufRead autocommand event: place any signs. func s:BufRead() let fname = expand('<afile>:p') for [id, entries] in items(s:breakpoints) for [subid, entry] in items(entries) if entry['fname'] == fname call s:PlaceSign(id, subid, entry) endif endfor endfor endfunc " Handle a BufUnloaded autocommand event: unplace any signs. func s:BufUnloaded() let fname = expand('<afile>:p') for [id, entries] in items(s:breakpoints) for [subid, entry] in items(entries) if entry['fname'] == fname let entry['placed'] = 0 endif endfor endfor endfunc let &cpo = s:keepcpo unlet s:keepcpo
Save
cmd:
run