FM / examples

/usr/share/doc/sg3-utils/examples

Name	Size	Mode	Actions
archive/	-	0755	rm
forwarded_sense.txt	296	0644	edit dl rm
Makefile	3159	0644	edit dl rm
Makefile.freebsd	2024	0644	edit dl rm
nvme_dev_self_test.hex	806	0644	edit dl rm
nvme_identify_ctl.hex	1198	0644	edit dl rm
README	776	0644	edit dl rm
reassign_addr.txt	465	0644	edit dl rm
ref_sense.txt	305	0644	edit dl rm
scsi_inquiry.c.gz	1627	0644	edit dl rm
sdiag_sas_p0_cjtpat.txt	405	0644	edit dl rm
sdiag_sas_p1_cjtpat.txt	464	0644	edit dl rm
sdiag_sas_p1_idle.txt	560	0644	edit dl rm
sdiag_sas_p1_stop.txt	359	0644	edit dl rm
sgq_dd.c.gz	9164	0644	edit dl rm
sg_compare_and_write.txt	2484	0644	edit dl rm
sg_excl.c.gz	2039	0644	edit dl rm
sg_persist_tst.sh	3624	0755	edit dl rm
sg_sat_chk_power.c.gz	3318	0644	edit dl rm
sg_sat_smart_rd_data.c.gz	2669	0644	edit dl rm
sg_simple1.c.gz	2046	0644	edit dl rm
sg_simple2.c.gz	2141	0644	edit dl rm
sg_simple3.c.gz	2151	0644	edit dl rm
sg_simple4.c.gz	2382	0644	edit dl rm
sg_simple5.c.gz	1933	0644	edit dl rm
sg_simple16.c	3494	0644	edit dl rm
sg_unmap_example.txt	1643	0644	edit dl rm
sg__sat_identify.c.gz	3086	0644	edit dl rm
sg__sat_phy_event.c.gz	4309	0644	edit dl rm
sg__sat_set_features.c.gz	3409	0644	edit dl rm
transport_ids.txt	1136	0644	edit dl rm

Edit: /usr/share/doc/sg3-utils/examples/transport_ids.txt (1136B)

# This file is an example for the sg_persist utility.
# It discusses using "TransportID"s which are defined (most recently)
# in SPC-4 revison 20 section 7.5.4 titled: "TransportID identifiers".
#
# The sg_persist utility can take one or more "transportID"s from stdin when
# either the '--transport-id=-" or "-X -" option is given on the command
# line.

# To see transport IDs decoded after they have been read in (e.g. to check
# they are well formed) use the verbose flag 3 times (i.e. "... -vvv ...").

# Here is a simple example (for SPI) of a comma separted hex list:
1,0,0,7,0,0,0,1         # SPI, initiator address=7, relative_port_num=1

# and here is the transport specific format for the same thing:
# spi,1,7

# An example for SAS follows, first as a hex string, then in transport
# specific format (incremented by 1)
6,0,0,0,50,6,5,b0,0,6,f2,60
sas,500605b00006f261

# For iSCSI the hex list form is awkward, better to use the transport
# specific format. [The leading spaces are ignored.]
    iqn.5886.com.acme.diskarrays-sn-a8675309

# Leading spaces and tabs before a '#' are ok.

# dpg 20090824

cmd: