FM / templates

/snap/core18/2999/etc/cloud/templates

Name	Size	Mode	Actions
chef_client.rb.tmpl	1667	0644	edit dl rm
chrony.conf.alpine.tmpl	1113	0644	edit dl rm
chrony.conf.centos.tmpl	1181	0644	edit dl rm
chrony.conf.cos.tmpl	775	0644	edit dl rm
chrony.conf.debian.tmpl	1111	0644	edit dl rm
chrony.conf.fedora.tmpl	1269	0644	edit dl rm
chrony.conf.freebsd.tmpl	14216	0644	edit dl rm
chrony.conf.opensuse-leap.tmpl	991	0644	edit dl rm
chrony.conf.opensuse-microos.tmpl	991	0644	edit dl rm
chrony.conf.opensuse-tumbleweed.tmpl	991	0644	edit dl rm
chrony.conf.opensuse.tmpl	991	0644	edit dl rm
chrony.conf.photon.tmpl	1269	0644	edit dl rm
chrony.conf.rhel.tmpl	1181	0644	edit dl rm
chrony.conf.sle-micro.tmpl	991	0644	edit dl rm
chrony.conf.sles.tmpl	991	0644	edit dl rm
chrony.conf.sle_hpc.tmpl	991	0644	edit dl rm
chrony.conf.ubuntu.tmpl	1280	0644	edit dl rm
host.mariner.tmpl	898	0644	edit dl rm
hosts.alpine.tmpl	919	0644	edit dl rm
hosts.arch.tmpl	841	0644	edit dl rm
hosts.debian.tmpl	845	0644	edit dl rm
hosts.freebsd.tmpl	911	0644	edit dl rm
hosts.gentoo.tmpl	910	0644	edit dl rm
hosts.photon.tmpl	874	0644	edit dl rm
hosts.redhat.tmpl	912	0644	edit dl rm
hosts.suse.tmpl	1067	0644	edit dl rm
ntp.conf.alpine.tmpl	203	0644	edit dl rm
ntp.conf.debian.tmpl	2150	0644	edit dl rm
ntp.conf.fedora.tmpl	2074	0644	edit dl rm
ntp.conf.freebsd.tmpl	4159	0644	edit dl rm
ntp.conf.opensuse.tmpl	2755	0644	edit dl rm
ntp.conf.photon.tmpl	1850	0644	edit dl rm
ntp.conf.rhel.tmpl	1852	0644	edit dl rm
ntp.conf.sles.tmpl	2755	0644	edit dl rm
ntp.conf.ubuntu.tmpl	2509	0644	edit dl rm
ntpd.conf.openbsd.tmpl	491	0644	edit dl rm
resolv.conf.tmpl	921	0644	edit dl rm
sources.list.debian.tmpl	1439	0644	edit dl rm
sources.list.ubuntu.tmpl	2858	0644	edit dl rm
systemd.resolved.conf.tmpl	504	0644	edit dl rm
timesyncd.conf.tmpl	203	0644	edit dl rm

Edit: /snap/core18/2999/etc/cloud/templates/ntp.conf.opensuse.tmpl (2755B)

## template:jinja

##
## Radio and modem clocks by convention have addresses in the 
## form 127.127.t.u, where t is the clock type and u is a unit 
## number in the range 0-3. 
##
## Most of these clocks require support in the form of a 
## serial port or special bus peripheral. The particular  
## device is normally specified by adding a soft link 
## /dev/device-u to the particular hardware device involved, 
## where u correspond to the unit number above. 
## 
## Generic DCF77 clock on serial port (Conrad DCF77)
## Address:     127.127.8.u
## Serial Port: /dev/refclock-u
##  
## (create soft link /dev/refclock-0 to the particular ttyS?)
##
# server 127.127.8.0 mode 5 prefer

##
## Undisciplined Local Clock. This is a fake driver intended for backup
## and when no outside source of synchronized time is available.
##
# server 127.127.1.0		# local clock (LCL)
# fudge  127.127.1.0 stratum 10	# LCL is unsynchronized

##
## Add external Servers using
## # rcntpd addserver <yourserver>
## The servers will only be added to the currently running instance, not
## to /etc/ntp.conf.
##
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}

# Access control configuration; see /usr/share/doc/packages/ntp/html/accopt.html for
# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
# might also be helpful.
#
# Note that "restrict" applies to both servers and clients, so a configuration
# that might be intended to block requests from certain clients could also end
# up blocking replies from your own upstream servers.

# By default, exchange time with everybody, but don't allow configuration.
restrict -4 default notrap nomodify nopeer noquery
restrict -6 default notrap nomodify nopeer noquery

# Local users may interrogate the ntp server more closely.
restrict 127.0.0.1
restrict ::1

# Clients from this (example!) subnet have unlimited access, but only if
# cryptographically authenticated.
#restrict 192.168.123.0 mask 255.255.255.0 notrust

##
## Miscellaneous stuff
##

driftfile /var/lib/ntp/drift/ntp.drift # path for drift file

logfile   /var/log/ntp		# alternate log file
# logconfig =syncstatus + sysevents
# logconfig =all

# statsdir /tmp/		# directory for statistics files
# filegen peerstats  file peerstats  type day enable
# filegen loopstats  file loopstats  type day enable
# filegen clockstats file clockstats type day enable

#
# Authentication stuff
#
keys /etc/ntp.keys		# path for keys file
trustedkey 1			# define trusted keys
requestkey 1			# key (7) for accessing server variables
controlkey 1			# key (6) for accessing server variables

cmd: