/var/www/flurhymez/vendor/google/apiclient-services/src/Compute/Resource
Edit: /var/www/flurhymez/vendor/google/apiclient-services/src/Compute/Resource/Instances.php (71719B)
* $computeService = new Google\Service\Compute(...);
* $instances = $computeService->instances;
*
*/
class Instances extends \Google\Service\Resource
{
/**
* Adds an access config to an instance's network interface.
* (instances.addAccessConfig)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance The instance name for this request.
* @param string $networkInterface The name of the network interface to add to
* this instance.
* @param AccessConfig $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function addAccessConfig($project, $zone, $instance, $networkInterface, AccessConfig $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance, 'networkInterface' => $networkInterface, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('addAccessConfig', [$params], Operation::class);
}
/**
* Adds existing resource policies to an instance. You can only add one policy
* right now which will be applied to this instance for scheduling live
* migrations. (instances.addResourcePolicies)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance The instance name for this request.
* @param InstancesAddResourcePoliciesRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function addResourcePolicies($project, $zone, $instance, InstancesAddResourcePoliciesRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('addResourcePolicies', [$params], Operation::class);
}
/**
* Retrieves an aggregated list of all of the instances in your project across
* all regions and zones. The performance of this method degrades when a filter
* is specified on a project that has a very large number of instances.
* (instances.aggregatedList)
*
* @param string $project Project ID for this request.
* @param array $optParams Optional parameters.
*
* @opt_param string filter A filter expression that filters resources listed in
* the response. The expression must specify the field name, an operator, and
* the value that you want to use for filtering. The value must be a string, a
* number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`,
* `>=` or `:`. For example, if you are filtering Compute Engine instances, you
* can exclude instances named `example-instance` by specifying `name !=
* example-instance`. The `:` operator can be used with string fields to match
* substrings. For non-string fields it is equivalent to the `=` operator. The
* `:*` comparison can be used to test whether a key has been defined. For
* example, to find all objects with `owner` label use: ``` labels.owner:* ```
* You can also filter nested fields. For example, you could specify
* `scheduling.automaticRestart = false` to include instances only if they are
* not scheduled for automatic restarts. You can use filtering on nested fields
* to filter based on resource labels. To filter on multiple expressions,
* provide each separate expression within parentheses. For example: ```
* (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By
* default, each expression is an `AND` expression. However, you can include
* `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel
* Skylake") OR (cpuPlatform = "Intel Broadwell") AND
* (scheduling.automaticRestart = true) ```
* @opt_param bool includeAllScopes Indicates whether every visible scope for
* each scope type (zone, region, global) should be included in the response.
* For new resource types added after this field, the flag has no effect as new
* resource types will always include every visible scope for each scope type in
* response. For resource types which predate this field, if this flag is
* omitted or false, only scopes of the scope types where the resource type is
* expected to be found will be included.
* @opt_param string maxResults The maximum number of results per page that
* should be returned. If the number of available results is larger than
* `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
* get the next page of results in subsequent list requests. Acceptable values
* are `0` to `500`, inclusive. (Default: `500`)
* @opt_param string orderBy Sorts list results by a certain order. By default,
* results are returned in alphanumerical order based on the resource name. You
* can also sort results in descending order based on the creation timestamp
* using `orderBy="creationTimestamp desc"`. This sorts results based on the
* `creationTimestamp` field in reverse chronological order (newest result
* first). Use this to sort resources like operations so that the newest
* operation is returned first. Currently, only sorting by `name` or
* `creationTimestamp desc` is supported.
* @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
* the `nextPageToken` returned by a previous list request to get the next page
* of results.
* @opt_param bool returnPartialSuccess Opt-in for partial success behavior
* which provides partial results in case of failure. The default value is
* false.
* @return InstanceAggregatedList
*/
public function aggregatedList($project, $optParams = [])
{
$params = ['project' => $project];
$params = array_merge($params, $optParams);
return $this->call('aggregatedList', [$params], InstanceAggregatedList::class);
}
/**
* Attaches an existing Disk resource to an instance. You must first create the
* disk before you can attach it. It is not possible to create and attach a disk
* at the same time. For more information, read Adding a persistent disk to your
* instance. (instances.attachDisk)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance The instance name for this request.
* @param AttachedDisk $postBody
* @param array $optParams Optional parameters.
*
* @opt_param bool forceAttach Whether to force attach the regional disk even if
* it's currently attached to another instance. If you try to force attach a
* zonal disk to an instance, you will receive an error.
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function attachDisk($project, $zone, $instance, AttachedDisk $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('attachDisk', [$params], Operation::class);
}
/**
* Creates multiple instances. Count specifies the number of instances to
* create. (instances.bulkInsert)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param BulkInsertInstanceResource $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function bulkInsert($project, $zone, BulkInsertInstanceResource $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('bulkInsert', [$params], Operation::class);
}
/**
* Deletes the specified Instance resource. For more information, see Deleting
* an instance. (instances.delete)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance resource to delete.
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function delete($project, $zone, $instance, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance];
$params = array_merge($params, $optParams);
return $this->call('delete', [$params], Operation::class);
}
/**
* Deletes an access config from an instance's network interface.
* (instances.deleteAccessConfig)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance The instance name for this request.
* @param string $accessConfig The name of the access config to delete.
* @param string $networkInterface The name of the network interface.
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function deleteAccessConfig($project, $zone, $instance, $accessConfig, $networkInterface, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance, 'accessConfig' => $accessConfig, 'networkInterface' => $networkInterface];
$params = array_merge($params, $optParams);
return $this->call('deleteAccessConfig', [$params], Operation::class);
}
/**
* Detaches a disk from an instance. (instances.detachDisk)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Instance name for this request.
* @param string $deviceName The device name of the disk to detach. Make a get()
* request on the instance to view currently attached disks and device names.
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function detachDisk($project, $zone, $instance, $deviceName, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance, 'deviceName' => $deviceName];
$params = array_merge($params, $optParams);
return $this->call('detachDisk', [$params], Operation::class);
}
/**
* Returns the specified Instance resource. Gets a list of available instances
* by making a list() request. (instances.get)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance resource to return.
* @param array $optParams Optional parameters.
* @return Instance
*/
public function get($project, $zone, $instance, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance];
$params = array_merge($params, $optParams);
return $this->call('get', [$params], Instance::class);
}
/**
* Returns effective firewalls applied to an interface of the instance.
* (instances.getEffectiveFirewalls)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance scoping this request.
* @param string $networkInterface The name of the network interface to get the
* effective firewalls.
* @param array $optParams Optional parameters.
* @return InstancesGetEffectiveFirewallsResponse
*/
public function getEffectiveFirewalls($project, $zone, $instance, $networkInterface, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance, 'networkInterface' => $networkInterface];
$params = array_merge($params, $optParams);
return $this->call('getEffectiveFirewalls', [$params], InstancesGetEffectiveFirewallsResponse::class);
}
/**
* Returns the specified guest attributes entry. (instances.getGuestAttributes)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance scoping this request.
* @param array $optParams Optional parameters.
*
* @opt_param string queryPath Specifies the guest attributes path to be
* queried.
* @opt_param string variableKey Specifies the key for the guest attributes
* entry.
* @return GuestAttributes
*/
public function getGuestAttributes($project, $zone, $instance, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance];
$params = array_merge($params, $optParams);
return $this->call('getGuestAttributes', [$params], GuestAttributes::class);
}
/**
* Gets the access control policy for a resource. May be empty if no such policy
* or resource exists. (instances.getIamPolicy)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $resource Name or id of the resource for this request.
* @param array $optParams Optional parameters.
*
* @opt_param int optionsRequestedPolicyVersion Requested IAM Policy version.
* @return Policy
*/
public function getIamPolicy($project, $zone, $resource, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'resource' => $resource];
$params = array_merge($params, $optParams);
return $this->call('getIamPolicy', [$params], Policy::class);
}
/**
* Returns the screenshot from the specified instance. (instances.getScreenshot)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance scoping this request.
* @param array $optParams Optional parameters.
* @return Screenshot
*/
public function getScreenshot($project, $zone, $instance, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance];
$params = array_merge($params, $optParams);
return $this->call('getScreenshot', [$params], Screenshot::class);
}
/**
* Returns the last 1 MB of serial port output from the specified instance.
* (instances.getSerialPortOutput)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance for this request.
* @param array $optParams Optional parameters.
*
* @opt_param int port Specifies which COM or serial port to retrieve data from.
* @opt_param string start Specifies the starting byte position of the output to
* return. To start with the first byte of output to the specified port, omit
* this field or set it to `0`. If the output for that byte position is
* available, this field matches the `start` parameter sent with the request. If
* the amount of serial console output exceeds the size of the buffer (1 MB),
* the oldest output is discarded and is no longer available. If the requested
* start position refers to discarded output, the start position is adjusted to
* the oldest output still available, and the adjusted start position is
* returned as the `start` property value. You can also provide a negative start
* position, which translates to the most recent number of bytes written to the
* serial port. For example, -3 is interpreted as the most recent 3 bytes
* written to the serial console.
* @return SerialPortOutput
*/
public function getSerialPortOutput($project, $zone, $instance, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance];
$params = array_merge($params, $optParams);
return $this->call('getSerialPortOutput', [$params], SerialPortOutput::class);
}
/**
* Returns the Shielded Instance Identity of an instance
* (instances.getShieldedInstanceIdentity)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name or id of the instance scoping this request.
* @param array $optParams Optional parameters.
* @return ShieldedInstanceIdentity
*/
public function getShieldedInstanceIdentity($project, $zone, $instance, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance];
$params = array_merge($params, $optParams);
return $this->call('getShieldedInstanceIdentity', [$params], ShieldedInstanceIdentity::class);
}
/**
* Creates an instance resource in the specified project using the data included
* in the request. (instances.insert)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param Instance $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @opt_param string sourceInstanceTemplate Specifies instance template to
* create the instance. This field is optional. It can be a full or partial URL.
* For example, the following are all valid URLs to an instance template: -
* https://www.googleapis.com/compute/v1/projects/project
* /global/instanceTemplates/instanceTemplate -
* projects/project/global/instanceTemplates/instanceTemplate -
* global/instanceTemplates/instanceTemplate
* @opt_param string sourceMachineImage Specifies the machine image to use to
* create the instance. This field is optional. It can be a full or partial URL.
* For example, the following are all valid URLs to a machine image: -
* https://www.googleapis.com/compute/v1/projects/project/global/global
* /machineImages/machineImage -
* projects/project/global/global/machineImages/machineImage -
* global/machineImages/machineImage
* @return Operation
*/
public function insert($project, $zone, Instance $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('insert', [$params], Operation::class);
}
/**
* Retrieves the list of instances contained within the specified zone.
* (instances.listInstances)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param array $optParams Optional parameters.
*
* @opt_param string filter A filter expression that filters resources listed in
* the response. The expression must specify the field name, an operator, and
* the value that you want to use for filtering. The value must be a string, a
* number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`,
* `>=` or `:`. For example, if you are filtering Compute Engine instances, you
* can exclude instances named `example-instance` by specifying `name !=
* example-instance`. The `:` operator can be used with string fields to match
* substrings. For non-string fields it is equivalent to the `=` operator. The
* `:*` comparison can be used to test whether a key has been defined. For
* example, to find all objects with `owner` label use: ``` labels.owner:* ```
* You can also filter nested fields. For example, you could specify
* `scheduling.automaticRestart = false` to include instances only if they are
* not scheduled for automatic restarts. You can use filtering on nested fields
* to filter based on resource labels. To filter on multiple expressions,
* provide each separate expression within parentheses. For example: ```
* (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By
* default, each expression is an `AND` expression. However, you can include
* `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel
* Skylake") OR (cpuPlatform = "Intel Broadwell") AND
* (scheduling.automaticRestart = true) ```
* @opt_param string maxResults The maximum number of results per page that
* should be returned. If the number of available results is larger than
* `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
* get the next page of results in subsequent list requests. Acceptable values
* are `0` to `500`, inclusive. (Default: `500`)
* @opt_param string orderBy Sorts list results by a certain order. By default,
* results are returned in alphanumerical order based on the resource name. You
* can also sort results in descending order based on the creation timestamp
* using `orderBy="creationTimestamp desc"`. This sorts results based on the
* `creationTimestamp` field in reverse chronological order (newest result
* first). Use this to sort resources like operations so that the newest
* operation is returned first. Currently, only sorting by `name` or
* `creationTimestamp desc` is supported.
* @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
* the `nextPageToken` returned by a previous list request to get the next page
* of results.
* @opt_param bool returnPartialSuccess Opt-in for partial success behavior
* which provides partial results in case of failure. The default value is
* false.
* @return InstanceList
*/
public function listInstances($project, $zone, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone];
$params = array_merge($params, $optParams);
return $this->call('list', [$params], InstanceList::class);
}
/**
* Retrieves a list of resources that refer to the VM instance specified in the
* request. For example, if the VM instance is part of a managed or unmanaged
* instance group, the referrers list includes the instance group. For more
* information, read Viewing referrers to VM instances.
* (instances.listReferrers)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the target instance scoping this request, or
* '-' if the request should span over all instances in the container.
* @param array $optParams Optional parameters.
*
* @opt_param string filter A filter expression that filters resources listed in
* the response. The expression must specify the field name, an operator, and
* the value that you want to use for filtering. The value must be a string, a
* number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`,
* `>=` or `:`. For example, if you are filtering Compute Engine instances, you
* can exclude instances named `example-instance` by specifying `name !=
* example-instance`. The `:` operator can be used with string fields to match
* substrings. For non-string fields it is equivalent to the `=` operator. The
* `:*` comparison can be used to test whether a key has been defined. For
* example, to find all objects with `owner` label use: ``` labels.owner:* ```
* You can also filter nested fields. For example, you could specify
* `scheduling.automaticRestart = false` to include instances only if they are
* not scheduled for automatic restarts. You can use filtering on nested fields
* to filter based on resource labels. To filter on multiple expressions,
* provide each separate expression within parentheses. For example: ```
* (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By
* default, each expression is an `AND` expression. However, you can include
* `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel
* Skylake") OR (cpuPlatform = "Intel Broadwell") AND
* (scheduling.automaticRestart = true) ```
* @opt_param string maxResults The maximum number of results per page that
* should be returned. If the number of available results is larger than
* `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
* get the next page of results in subsequent list requests. Acceptable values
* are `0` to `500`, inclusive. (Default: `500`)
* @opt_param string orderBy Sorts list results by a certain order. By default,
* results are returned in alphanumerical order based on the resource name. You
* can also sort results in descending order based on the creation timestamp
* using `orderBy="creationTimestamp desc"`. This sorts results based on the
* `creationTimestamp` field in reverse chronological order (newest result
* first). Use this to sort resources like operations so that the newest
* operation is returned first. Currently, only sorting by `name` or
* `creationTimestamp desc` is supported.
* @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
* the `nextPageToken` returned by a previous list request to get the next page
* of results.
* @opt_param bool returnPartialSuccess Opt-in for partial success behavior
* which provides partial results in case of failure. The default value is
* false.
* @return InstanceListReferrers
*/
public function listReferrers($project, $zone, $instance, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance];
$params = array_merge($params, $optParams);
return $this->call('listReferrers', [$params], InstanceListReferrers::class);
}
/**
* Removes resource policies from an instance.
* (instances.removeResourcePolicies)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance The instance name for this request.
* @param InstancesRemoveResourcePoliciesRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function removeResourcePolicies($project, $zone, $instance, InstancesRemoveResourcePoliciesRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('removeResourcePolicies', [$params], Operation::class);
}
/**
* Performs a reset on the instance. This is a hard reset the VM does not do a
* graceful shutdown. For more information, see Resetting an instance.
* (instances.reset)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance scoping this request.
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function reset($project, $zone, $instance, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance];
$params = array_merge($params, $optParams);
return $this->call('reset', [$params], Operation::class);
}
/**
* Sends diagnostic interrupt to the instance.
* (instances.sendDiagnosticInterrupt)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance scoping this request.
* @param array $optParams Optional parameters.
*/
public function sendDiagnosticInterrupt($project, $zone, $instance, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance];
$params = array_merge($params, $optParams);
return $this->call('sendDiagnosticInterrupt', [$params]);
}
/**
* Sets deletion protection on the instance. (instances.setDeletionProtection)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $resource Name or id of the resource for this request.
* @param array $optParams Optional parameters.
*
* @opt_param bool deletionProtection Whether the resource should be protected
* against deletion.
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function setDeletionProtection($project, $zone, $resource, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'resource' => $resource];
$params = array_merge($params, $optParams);
return $this->call('setDeletionProtection', [$params], Operation::class);
}
/**
* Sets the auto-delete flag for a disk attached to an instance.
* (instances.setDiskAutoDelete)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance The instance name for this request.
* @param bool $autoDelete Whether to auto-delete the disk when the instance is
* deleted.
* @param string $deviceName The device name of the disk to modify. Make a get()
* request on the instance to view currently attached disks and device names.
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function setDiskAutoDelete($project, $zone, $instance, $autoDelete, $deviceName, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance, 'autoDelete' => $autoDelete, 'deviceName' => $deviceName];
$params = array_merge($params, $optParams);
return $this->call('setDiskAutoDelete', [$params], Operation::class);
}
/**
* Sets the access control policy on the specified resource. Replaces any
* existing policy. (instances.setIamPolicy)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $resource Name or id of the resource for this request.
* @param ZoneSetPolicyRequest $postBody
* @param array $optParams Optional parameters.
* @return Policy
*/
public function setIamPolicy($project, $zone, $resource, ZoneSetPolicyRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'resource' => $resource, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('setIamPolicy', [$params], Policy::class);
}
/**
* Sets labels on an instance. To learn more about labels, read the Labeling
* Resources documentation. (instances.setLabels)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance scoping this request.
* @param InstancesSetLabelsRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function setLabels($project, $zone, $instance, InstancesSetLabelsRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('setLabels', [$params], Operation::class);
}
/**
* Changes the number and/or type of accelerator for a stopped instance to the
* values specified in the request. (instances.setMachineResources)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance scoping this request.
* @param InstancesSetMachineResourcesRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function setMachineResources($project, $zone, $instance, InstancesSetMachineResourcesRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('setMachineResources', [$params], Operation::class);
}
/**
* Changes the machine type for a stopped instance to the machine type specified
* in the request. (instances.setMachineType)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance scoping this request.
* @param InstancesSetMachineTypeRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function setMachineType($project, $zone, $instance, InstancesSetMachineTypeRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('setMachineType', [$params], Operation::class);
}
/**
* Sets metadata for the specified instance to the data included in the request.
* (instances.setMetadata)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance scoping this request.
* @param Metadata $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function setMetadata($project, $zone, $instance, Metadata $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('setMetadata', [$params], Operation::class);
}
/**
* Changes the minimum CPU platform that this instance should use. This method
* can only be called on a stopped instance. For more information, read
* Specifying a Minimum CPU Platform. (instances.setMinCpuPlatform)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance scoping this request.
* @param InstancesSetMinCpuPlatformRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function setMinCpuPlatform($project, $zone, $instance, InstancesSetMinCpuPlatformRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('setMinCpuPlatform', [$params], Operation::class);
}
/**
* Sets an instance's scheduling options. You can only call this method on a
* stopped instance, that is, a VM instance that is in a `TERMINATED` state. See
* Instance Life Cycle for more information on the possible instance states.
* (instances.setScheduling)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Instance name for this request.
* @param Scheduling $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function setScheduling($project, $zone, $instance, Scheduling $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('setScheduling', [$params], Operation::class);
}
/**
* Sets the service account on the instance. For more information, read Changing
* the service account and access scopes for an instance.
* (instances.setServiceAccount)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance resource to start.
* @param InstancesSetServiceAccountRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function setServiceAccount($project, $zone, $instance, InstancesSetServiceAccountRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('setServiceAccount', [$params], Operation::class);
}
/**
* Sets the Shielded Instance integrity policy for an instance. You can only use
* this method on a running instance. This method supports PATCH semantics and
* uses the JSON merge patch format and processing rules.
* (instances.setShieldedInstanceIntegrityPolicy)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name or id of the instance scoping this request.
* @param ShieldedInstanceIntegrityPolicy $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function setShieldedInstanceIntegrityPolicy($project, $zone, $instance, ShieldedInstanceIntegrityPolicy $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('setShieldedInstanceIntegrityPolicy', [$params], Operation::class);
}
/**
* Sets network tags for the specified instance to the data included in the
* request. (instances.setTags)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance scoping this request.
* @param Tags $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function setTags($project, $zone, $instance, Tags $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('setTags', [$params], Operation::class);
}
/**
* Simulates a maintenance event on the instance.
* (instances.simulateMaintenanceEvent)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance scoping this request.
* @param array $optParams Optional parameters.
* @return Operation
*/
public function simulateMaintenanceEvent($project, $zone, $instance, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance];
$params = array_merge($params, $optParams);
return $this->call('simulateMaintenanceEvent', [$params], Operation::class);
}
/**
* Starts an instance that was stopped using the instances().stop method. For
* more information, see Restart an instance. (instances.start)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance resource to start.
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function start($project, $zone, $instance, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance];
$params = array_merge($params, $optParams);
return $this->call('start', [$params], Operation::class);
}
/**
* Starts an instance that was stopped using the instances().stop method. For
* more information, see Restart an instance. (instances.startWithEncryptionKey)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance resource to start.
* @param InstancesStartWithEncryptionKeyRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function startWithEncryptionKey($project, $zone, $instance, InstancesStartWithEncryptionKeyRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('startWithEncryptionKey', [$params], Operation::class);
}
/**
* Stops a running instance, shutting it down cleanly, and allows you to restart
* the instance at a later time. Stopped instances do not incur VM usage charges
* while they are stopped. However, resources that the VM is using, such as
* persistent disks and static IP addresses, will continue to be charged until
* they are deleted. For more information, see Stopping an instance.
* (instances.stop)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance resource to stop.
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function stop($project, $zone, $instance, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance];
$params = array_merge($params, $optParams);
return $this->call('stop', [$params], Operation::class);
}
/**
* Returns permissions that a caller has on the specified resource.
* (instances.testIamPermissions)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $resource Name or id of the resource for this request.
* @param TestPermissionsRequest $postBody
* @param array $optParams Optional parameters.
* @return TestPermissionsResponse
*/
public function testIamPermissions($project, $zone, $resource, TestPermissionsRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'resource' => $resource, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('testIamPermissions', [$params], TestPermissionsResponse::class);
}
/**
* Updates an instance only if the necessary resources are available. This
* method can update only a specific set of instance properties. See Updating a
* running instance for a list of updatable instance properties.
* (instances.update)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance resource to update.
* @param Instance $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string minimalAction Specifies the action to take when updating an
* instance even if the updated properties do not require it. If not specified,
* then Compute Engine acts based on the minimum action that the updated
* properties require.
* @opt_param string mostDisruptiveAllowedAction Specifies the most disruptive
* action that can be taken on the instance as part of the update. Compute
* Engine returns an error if the instance properties require a more disruptive
* action as part of the instance update. Valid options from lowest to highest
* are NO_EFFECT, REFRESH, and RESTART.
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function update($project, $zone, $instance, Instance $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('update', [$params], Operation::class);
}
/**
* Updates the specified access config from an instance's network interface with
* the data included in the request. This method supports PATCH semantics and
* uses the JSON merge patch format and processing rules.
* (instances.updateAccessConfig)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance The instance name for this request.
* @param string $networkInterface The name of the network interface where the
* access config is attached.
* @param AccessConfig $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function updateAccessConfig($project, $zone, $instance, $networkInterface, AccessConfig $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance, 'networkInterface' => $networkInterface, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('updateAccessConfig', [$params], Operation::class);
}
/**
* Updates the Display config for a VM instance. You can only use this method on
* a stopped VM instance. This method supports PATCH semantics and uses the JSON
* merge patch format and processing rules. (instances.updateDisplayDevice)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance scoping this request.
* @param DisplayDevice $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function updateDisplayDevice($project, $zone, $instance, DisplayDevice $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('updateDisplayDevice', [$params], Operation::class);
}
/**
* Updates an instance's network interface. This method can only update an
* interface's alias IP range and attached network. See Modifying alias IP
* ranges for an existing instance for instructions on changing alias IP ranges.
* See Migrating a VM between networks for instructions on migrating an
* interface. This method follows PATCH semantics.
* (instances.updateNetworkInterface)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance The instance name for this request.
* @param string $networkInterface The name of the network interface to update.
* @param NetworkInterface $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function updateNetworkInterface($project, $zone, $instance, $networkInterface, NetworkInterface $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance, 'networkInterface' => $networkInterface, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('updateNetworkInterface', [$params], Operation::class);
}
/**
* Updates the Shielded Instance config for an instance. You can only use this
* method on a stopped instance. This method supports PATCH semantics and uses
* the JSON merge patch format and processing rules.
* (instances.updateShieldedInstanceConfig)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name or id of the instance scoping this request.
* @param ShieldedInstanceConfig $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function updateShieldedInstanceConfig($project, $zone, $instance, ShieldedInstanceConfig $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('updateShieldedInstanceConfig', [$params], Operation::class);
}
}
// Adding a class alias for backwards compatibility with the previous class name.
class_alias(Instances::class, 'Google_Service_Compute_Resource_Instances');