/var/www/flurhymez/vendor/google/apiclient-services/src/Compute/Resource
Edit: /var/www/flurhymez/vendor/google/apiclient-services/src/Compute/Resource/InstanceGroupManagers.php (50057B)
* $computeService = new Google\Service\Compute(...);
* $instanceGroupManagers = $computeService->instanceGroupManagers;
*
*/
class InstanceGroupManagers extends \Google\Service\Resource
{
/**
* Flags the specified instances to be removed from the managed instance group.
* Abandoning an instance does not delete the instance, but it does remove the
* instance from any target pools that are applied by the managed instance
* group. This method reduces the targetSize of the managed instance group by
* the number of instances that you abandon. This operation is marked as DONE
* when the action is scheduled even if the instances have not yet been removed
* from the group. You must separately verify the status of the abandoning
* action with the listmanagedinstances method. If the group is part of a
* backend service that has enabled connection draining, it can take up to 60
* seconds after the connection draining duration has elapsed before the VM
* instance is removed or deleted. You can specify a maximum of 1000 instances
* with this method per request. (instanceGroupManagers.abandonInstances)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone where the managed instance group is
* located.
* @param string $instanceGroupManager The name of the managed instance group.
* @param InstanceGroupManagersAbandonInstancesRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function abandonInstances($project, $zone, $instanceGroupManager, InstanceGroupManagersAbandonInstancesRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('abandonInstances', [$params], Operation::class);
}
/**
* Retrieves the list of managed instance groups and groups them by zone.
* (instanceGroupManagers.aggregatedList)
*
* @param string $project Project ID for this request.
* @param array $optParams Optional parameters.
*
* @opt_param string filter A filter expression that filters resources listed in
* the response. The expression must specify the field name, an operator, and
* the value that you want to use for filtering. The value must be a string, a
* number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`,
* `>=` or `:`. For example, if you are filtering Compute Engine instances, you
* can exclude instances named `example-instance` by specifying `name !=
* example-instance`. The `:` operator can be used with string fields to match
* substrings. For non-string fields it is equivalent to the `=` operator. The
* `:*` comparison can be used to test whether a key has been defined. For
* example, to find all objects with `owner` label use: ``` labels.owner:* ```
* You can also filter nested fields. For example, you could specify
* `scheduling.automaticRestart = false` to include instances only if they are
* not scheduled for automatic restarts. You can use filtering on nested fields
* to filter based on resource labels. To filter on multiple expressions,
* provide each separate expression within parentheses. For example: ```
* (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By
* default, each expression is an `AND` expression. However, you can include
* `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel
* Skylake") OR (cpuPlatform = "Intel Broadwell") AND
* (scheduling.automaticRestart = true) ```
* @opt_param bool includeAllScopes Indicates whether every visible scope for
* each scope type (zone, region, global) should be included in the response.
* For new resource types added after this field, the flag has no effect as new
* resource types will always include every visible scope for each scope type in
* response. For resource types which predate this field, if this flag is
* omitted or false, only scopes of the scope types where the resource type is
* expected to be found will be included.
* @opt_param string maxResults The maximum number of results per page that
* should be returned. If the number of available results is larger than
* `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
* get the next page of results in subsequent list requests. Acceptable values
* are `0` to `500`, inclusive. (Default: `500`)
* @opt_param string orderBy Sorts list results by a certain order. By default,
* results are returned in alphanumerical order based on the resource name. You
* can also sort results in descending order based on the creation timestamp
* using `orderBy="creationTimestamp desc"`. This sorts results based on the
* `creationTimestamp` field in reverse chronological order (newest result
* first). Use this to sort resources like operations so that the newest
* operation is returned first. Currently, only sorting by `name` or
* `creationTimestamp desc` is supported.
* @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
* the `nextPageToken` returned by a previous list request to get the next page
* of results.
* @opt_param bool returnPartialSuccess Opt-in for partial success behavior
* which provides partial results in case of failure. The default value is
* false.
* @return InstanceGroupManagerAggregatedList
*/
public function aggregatedList($project, $optParams = [])
{
$params = ['project' => $project];
$params = array_merge($params, $optParams);
return $this->call('aggregatedList', [$params], InstanceGroupManagerAggregatedList::class);
}
/**
* Applies changes to selected instances on the managed instance group. This
* method can be used to apply new overrides and/or new versions.
* (instanceGroupManagers.applyUpdatesToInstances)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone where the managed instance group is
* located. Should conform to RFC1035.
* @param string $instanceGroupManager The name of the managed instance group,
* should conform to RFC1035.
* @param InstanceGroupManagersApplyUpdatesRequest $postBody
* @param array $optParams Optional parameters.
* @return Operation
*/
public function applyUpdatesToInstances($project, $zone, $instanceGroupManager, InstanceGroupManagersApplyUpdatesRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('applyUpdatesToInstances', [$params], Operation::class);
}
/**
* Creates instances with per-instance configs in this managed instance group.
* Instances are created using the current instance template. The create
* instances operation is marked DONE if the createInstances request is
* successful. The underlying actions take additional time. You must separately
* verify the status of the creating or actions with the listmanagedinstances
* method. (instanceGroupManagers.createInstances)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone where the managed instance group is
* located. It should conform to RFC1035.
* @param string $instanceGroupManager The name of the managed instance group.
* It should conform to RFC1035.
* @param InstanceGroupManagersCreateInstancesRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function createInstances($project, $zone, $instanceGroupManager, InstanceGroupManagersCreateInstancesRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('createInstances', [$params], Operation::class);
}
/**
* Deletes the specified managed instance group and all of the instances in that
* group. Note that the instance group must not belong to a backend service.
* Read Deleting an instance group for more information.
* (instanceGroupManagers.delete)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone where the managed instance group is
* located.
* @param string $instanceGroupManager The name of the managed instance group to
* delete.
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function delete($project, $zone, $instanceGroupManager, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager];
$params = array_merge($params, $optParams);
return $this->call('delete', [$params], Operation::class);
}
/**
* Flags the specified instances in the managed instance group for immediate
* deletion. The instances are also removed from any target pools of which they
* were a member. This method reduces the targetSize of the managed instance
* group by the number of instances that you delete. This operation is marked as
* DONE when the action is scheduled even if the instances are still being
* deleted. You must separately verify the status of the deleting action with
* the listmanagedinstances method. If the group is part of a backend service
* that has enabled connection draining, it can take up to 60 seconds after the
* connection draining duration has elapsed before the VM instance is removed or
* deleted. You can specify a maximum of 1000 instances with this method per
* request. (instanceGroupManagers.deleteInstances)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone where the managed instance group is
* located.
* @param string $instanceGroupManager The name of the managed instance group.
* @param InstanceGroupManagersDeleteInstancesRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function deleteInstances($project, $zone, $instanceGroupManager, InstanceGroupManagersDeleteInstancesRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('deleteInstances', [$params], Operation::class);
}
/**
* Deletes selected per-instance configs for the managed instance group.
* (instanceGroupManagers.deletePerInstanceConfigs)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone where the managed instance group is
* located. It should conform to RFC1035.
* @param string $instanceGroupManager The name of the managed instance group.
* It should conform to RFC1035.
* @param InstanceGroupManagersDeletePerInstanceConfigsReq $postBody
* @param array $optParams Optional parameters.
* @return Operation
*/
public function deletePerInstanceConfigs($project, $zone, $instanceGroupManager, InstanceGroupManagersDeletePerInstanceConfigsReq $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('deletePerInstanceConfigs', [$params], Operation::class);
}
/**
* Returns all of the details about the specified managed instance group. Gets a
* list of available managed instance groups by making a list() request.
* (instanceGroupManagers.get)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone where the managed instance group is
* located.
* @param string $instanceGroupManager The name of the managed instance group.
* @param array $optParams Optional parameters.
* @return InstanceGroupManager
*/
public function get($project, $zone, $instanceGroupManager, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager];
$params = array_merge($params, $optParams);
return $this->call('get', [$params], InstanceGroupManager::class);
}
/**
* Creates a managed instance group using the information that you specify in
* the request. After the group is created, instances in the group are created
* using the specified instance template. This operation is marked as DONE when
* the group is created even if the instances in the group have not yet been
* created. You must separately verify the status of the individual instances
* with the listmanagedinstances method. A managed instance group can have up to
* 1000 VM instances per group. Please contact Cloud Support if you need an
* increase in this limit. (instanceGroupManagers.insert)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone where you want to create the managed
* instance group.
* @param InstanceGroupManager $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function insert($project, $zone, InstanceGroupManager $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('insert', [$params], Operation::class);
}
/**
* Retrieves a list of managed instance groups that are contained within the
* specified project and zone. (instanceGroupManagers.listInstanceGroupManagers)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone where the managed instance group is
* located.
* @param array $optParams Optional parameters.
*
* @opt_param string filter A filter expression that filters resources listed in
* the response. The expression must specify the field name, an operator, and
* the value that you want to use for filtering. The value must be a string, a
* number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`,
* `>=` or `:`. For example, if you are filtering Compute Engine instances, you
* can exclude instances named `example-instance` by specifying `name !=
* example-instance`. The `:` operator can be used with string fields to match
* substrings. For non-string fields it is equivalent to the `=` operator. The
* `:*` comparison can be used to test whether a key has been defined. For
* example, to find all objects with `owner` label use: ``` labels.owner:* ```
* You can also filter nested fields. For example, you could specify
* `scheduling.automaticRestart = false` to include instances only if they are
* not scheduled for automatic restarts. You can use filtering on nested fields
* to filter based on resource labels. To filter on multiple expressions,
* provide each separate expression within parentheses. For example: ```
* (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By
* default, each expression is an `AND` expression. However, you can include
* `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel
* Skylake") OR (cpuPlatform = "Intel Broadwell") AND
* (scheduling.automaticRestart = true) ```
* @opt_param string maxResults The maximum number of results per page that
* should be returned. If the number of available results is larger than
* `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
* get the next page of results in subsequent list requests. Acceptable values
* are `0` to `500`, inclusive. (Default: `500`)
* @opt_param string orderBy Sorts list results by a certain order. By default,
* results are returned in alphanumerical order based on the resource name. You
* can also sort results in descending order based on the creation timestamp
* using `orderBy="creationTimestamp desc"`. This sorts results based on the
* `creationTimestamp` field in reverse chronological order (newest result
* first). Use this to sort resources like operations so that the newest
* operation is returned first. Currently, only sorting by `name` or
* `creationTimestamp desc` is supported.
* @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
* the `nextPageToken` returned by a previous list request to get the next page
* of results.
* @opt_param bool returnPartialSuccess Opt-in for partial success behavior
* which provides partial results in case of failure. The default value is
* false.
* @return InstanceGroupManagerList
*/
public function listInstanceGroupManagers($project, $zone, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone];
$params = array_merge($params, $optParams);
return $this->call('list', [$params], InstanceGroupManagerList::class);
}
/**
* Lists all errors thrown by actions on instances for a given managed instance
* group. The filter and orderBy query parameters are not supported.
* (instanceGroupManagers.listErrors)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone where the managed instance group is
* located. It should conform to RFC1035.
* @param string $instanceGroupManager The name of the managed instance group.
* It must be a string that meets the requirements in RFC1035, or an unsigned
* long integer: must match regexp pattern:
* (?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?)|1-9{0,19}.
* @param array $optParams Optional parameters.
*
* @opt_param string filter A filter expression that filters resources listed in
* the response. The expression must specify the field name, an operator, and
* the value that you want to use for filtering. The value must be a string, a
* number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`,
* `>=` or `:`. For example, if you are filtering Compute Engine instances, you
* can exclude instances named `example-instance` by specifying `name !=
* example-instance`. The `:` operator can be used with string fields to match
* substrings. For non-string fields it is equivalent to the `=` operator. The
* `:*` comparison can be used to test whether a key has been defined. For
* example, to find all objects with `owner` label use: ``` labels.owner:* ```
* You can also filter nested fields. For example, you could specify
* `scheduling.automaticRestart = false` to include instances only if they are
* not scheduled for automatic restarts. You can use filtering on nested fields
* to filter based on resource labels. To filter on multiple expressions,
* provide each separate expression within parentheses. For example: ```
* (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By
* default, each expression is an `AND` expression. However, you can include
* `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel
* Skylake") OR (cpuPlatform = "Intel Broadwell") AND
* (scheduling.automaticRestart = true) ```
* @opt_param string maxResults The maximum number of results per page that
* should be returned. If the number of available results is larger than
* `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
* get the next page of results in subsequent list requests. Acceptable values
* are `0` to `500`, inclusive. (Default: `500`)
* @opt_param string orderBy Sorts list results by a certain order. By default,
* results are returned in alphanumerical order based on the resource name. You
* can also sort results in descending order based on the creation timestamp
* using `orderBy="creationTimestamp desc"`. This sorts results based on the
* `creationTimestamp` field in reverse chronological order (newest result
* first). Use this to sort resources like operations so that the newest
* operation is returned first. Currently, only sorting by `name` or
* `creationTimestamp desc` is supported.
* @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
* the `nextPageToken` returned by a previous list request to get the next page
* of results.
* @opt_param bool returnPartialSuccess Opt-in for partial success behavior
* which provides partial results in case of failure. The default value is
* false.
* @return InstanceGroupManagersListErrorsResponse
*/
public function listErrors($project, $zone, $instanceGroupManager, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager];
$params = array_merge($params, $optParams);
return $this->call('listErrors', [$params], InstanceGroupManagersListErrorsResponse::class);
}
/**
* Lists all of the instances in the managed instance group. Each instance in
* the list has a currentAction, which indicates the action that the managed
* instance group is performing on the instance. For example, if the group is
* still creating an instance, the currentAction is CREATING. If a previous
* action failed, the list displays the errors for that failed action. The
* orderBy query parameter is not supported.
* (instanceGroupManagers.listManagedInstances)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone where the managed instance group is
* located.
* @param string $instanceGroupManager The name of the managed instance group.
* @param array $optParams Optional parameters.
*
* @opt_param string filter A filter expression that filters resources listed in
* the response. The expression must specify the field name, an operator, and
* the value that you want to use for filtering. The value must be a string, a
* number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`,
* `>=` or `:`. For example, if you are filtering Compute Engine instances, you
* can exclude instances named `example-instance` by specifying `name !=
* example-instance`. The `:` operator can be used with string fields to match
* substrings. For non-string fields it is equivalent to the `=` operator. The
* `:*` comparison can be used to test whether a key has been defined. For
* example, to find all objects with `owner` label use: ``` labels.owner:* ```
* You can also filter nested fields. For example, you could specify
* `scheduling.automaticRestart = false` to include instances only if they are
* not scheduled for automatic restarts. You can use filtering on nested fields
* to filter based on resource labels. To filter on multiple expressions,
* provide each separate expression within parentheses. For example: ```
* (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By
* default, each expression is an `AND` expression. However, you can include
* `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel
* Skylake") OR (cpuPlatform = "Intel Broadwell") AND
* (scheduling.automaticRestart = true) ```
* @opt_param string maxResults The maximum number of results per page that
* should be returned. If the number of available results is larger than
* `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
* get the next page of results in subsequent list requests. Acceptable values
* are `0` to `500`, inclusive. (Default: `500`)
* @opt_param string orderBy Sorts list results by a certain order. By default,
* results are returned in alphanumerical order based on the resource name. You
* can also sort results in descending order based on the creation timestamp
* using `orderBy="creationTimestamp desc"`. This sorts results based on the
* `creationTimestamp` field in reverse chronological order (newest result
* first). Use this to sort resources like operations so that the newest
* operation is returned first. Currently, only sorting by `name` or
* `creationTimestamp desc` is supported.
* @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
* the `nextPageToken` returned by a previous list request to get the next page
* of results.
* @opt_param bool returnPartialSuccess Opt-in for partial success behavior
* which provides partial results in case of failure. The default value is
* false.
* @return InstanceGroupManagersListManagedInstancesResponse
*/
public function listManagedInstances($project, $zone, $instanceGroupManager, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager];
$params = array_merge($params, $optParams);
return $this->call('listManagedInstances', [$params], InstanceGroupManagersListManagedInstancesResponse::class);
}
/**
* Lists all of the per-instance configs defined for the managed instance group.
* The orderBy query parameter is not supported.
* (instanceGroupManagers.listPerInstanceConfigs)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone where the managed instance group is
* located. It should conform to RFC1035.
* @param string $instanceGroupManager The name of the managed instance group.
* It should conform to RFC1035.
* @param array $optParams Optional parameters.
*
* @opt_param string filter A filter expression that filters resources listed in
* the response. The expression must specify the field name, an operator, and
* the value that you want to use for filtering. The value must be a string, a
* number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`,
* `>=` or `:`. For example, if you are filtering Compute Engine instances, you
* can exclude instances named `example-instance` by specifying `name !=
* example-instance`. The `:` operator can be used with string fields to match
* substrings. For non-string fields it is equivalent to the `=` operator. The
* `:*` comparison can be used to test whether a key has been defined. For
* example, to find all objects with `owner` label use: ``` labels.owner:* ```
* You can also filter nested fields. For example, you could specify
* `scheduling.automaticRestart = false` to include instances only if they are
* not scheduled for automatic restarts. You can use filtering on nested fields
* to filter based on resource labels. To filter on multiple expressions,
* provide each separate expression within parentheses. For example: ```
* (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By
* default, each expression is an `AND` expression. However, you can include
* `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel
* Skylake") OR (cpuPlatform = "Intel Broadwell") AND
* (scheduling.automaticRestart = true) ```
* @opt_param string maxResults The maximum number of results per page that
* should be returned. If the number of available results is larger than
* `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
* get the next page of results in subsequent list requests. Acceptable values
* are `0` to `500`, inclusive. (Default: `500`)
* @opt_param string orderBy Sorts list results by a certain order. By default,
* results are returned in alphanumerical order based on the resource name. You
* can also sort results in descending order based on the creation timestamp
* using `orderBy="creationTimestamp desc"`. This sorts results based on the
* `creationTimestamp` field in reverse chronological order (newest result
* first). Use this to sort resources like operations so that the newest
* operation is returned first. Currently, only sorting by `name` or
* `creationTimestamp desc` is supported.
* @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
* the `nextPageToken` returned by a previous list request to get the next page
* of results.
* @opt_param bool returnPartialSuccess Opt-in for partial success behavior
* which provides partial results in case of failure. The default value is
* false.
* @return InstanceGroupManagersListPerInstanceConfigsResp
*/
public function listPerInstanceConfigs($project, $zone, $instanceGroupManager, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager];
$params = array_merge($params, $optParams);
return $this->call('listPerInstanceConfigs', [$params], InstanceGroupManagersListPerInstanceConfigsResp::class);
}
/**
* Updates a managed instance group using the information that you specify in
* the request. This operation is marked as DONE when the group is patched even
* if the instances in the group are still in the process of being patched. You
* must separately verify the status of the individual instances with the
* listManagedInstances method. This method supports PATCH semantics and uses
* the JSON merge patch format and processing rules. If you update your group to
* specify a new template or instance configuration, it's possible that your
* intended specification for each VM in the group is different from the current
* state of that VM. To learn how to apply an updated configuration to the VMs
* in a MIG, see Updating instances in a MIG. (instanceGroupManagers.patch)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone where you want to create the managed
* instance group.
* @param string $instanceGroupManager The name of the instance group manager.
* @param InstanceGroupManager $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function patch($project, $zone, $instanceGroupManager, InstanceGroupManager $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('patch', [$params], Operation::class);
}
/**
* Inserts or patches per-instance configs for the managed instance group.
* perInstanceConfig.name serves as a key used to distinguish whether to perform
* insert or patch. (instanceGroupManagers.patchPerInstanceConfigs)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone where the managed instance group is
* located. It should conform to RFC1035.
* @param string $instanceGroupManager The name of the managed instance group.
* It should conform to RFC1035.
* @param InstanceGroupManagersPatchPerInstanceConfigsReq $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function patchPerInstanceConfigs($project, $zone, $instanceGroupManager, InstanceGroupManagersPatchPerInstanceConfigsReq $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('patchPerInstanceConfigs', [$params], Operation::class);
}
/**
* Flags the specified VM instances in the managed instance group to be
* immediately recreated. Each instance is recreated using the group's current
* configuration. This operation is marked as DONE when the flag is set even if
* the instances have not yet been recreated. You must separately verify the
* status of each instance by checking its currentAction field; for more
* information, see Checking the status of managed instances. If the group is
* part of a backend service that has enabled connection draining, it can take
* up to 60 seconds after the connection draining duration has elapsed before
* the VM instance is removed or deleted. You can specify a maximum of 1000
* instances with this method per request.
* (instanceGroupManagers.recreateInstances)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone where the managed instance group is
* located.
* @param string $instanceGroupManager The name of the managed instance group.
* @param InstanceGroupManagersRecreateInstancesRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function recreateInstances($project, $zone, $instanceGroupManager, InstanceGroupManagersRecreateInstancesRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('recreateInstances', [$params], Operation::class);
}
/**
* Resizes the managed instance group. If you increase the size, the group
* creates new instances using the current instance template. If you decrease
* the size, the group deletes instances. The resize operation is marked DONE
* when the resize actions are scheduled even if the group has not yet added or
* deleted any instances. You must separately verify the status of the creating
* or deleting actions with the listmanagedinstances method. When resizing down,
* the instance group arbitrarily chooses the order in which VMs are deleted.
* The group takes into account some VM attributes when making the selection
* including: + The status of the VM instance. + The health of the VM instance.
* + The instance template version the VM is based on. + For regional managed
* instance groups, the location of the VM instance. This list is subject to
* change. If the group is part of a backend service that has enabled connection
* draining, it can take up to 60 seconds after the connection draining duration
* has elapsed before the VM instance is removed or deleted.
* (instanceGroupManagers.resize)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone where the managed instance group is
* located.
* @param string $instanceGroupManager The name of the managed instance group.
* @param int $size The number of running instances that the managed instance
* group should maintain at any given time. The group automatically adds or
* removes instances to maintain the number of instances specified by this
* parameter.
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function resize($project, $zone, $instanceGroupManager, $size, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'size' => $size];
$params = array_merge($params, $optParams);
return $this->call('resize', [$params], Operation::class);
}
/**
* Specifies the instance template to use when creating new instances in this
* group. The templates for existing instances in the group do not change unless
* you run recreateInstances, run applyUpdatesToInstances, or set the group's
* updatePolicy.type to PROACTIVE. (instanceGroupManagers.setInstanceTemplate)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone where the managed instance group is
* located.
* @param string $instanceGroupManager The name of the managed instance group.
* @param InstanceGroupManagersSetInstanceTemplateRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function setInstanceTemplate($project, $zone, $instanceGroupManager, InstanceGroupManagersSetInstanceTemplateRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('setInstanceTemplate', [$params], Operation::class);
}
/**
* Modifies the target pools to which all instances in this managed instance
* group are assigned. The target pools automatically apply to all of the
* instances in the managed instance group. This operation is marked DONE when
* you make the request even if the instances have not yet been added to their
* target pools. The change might take some time to apply to all of the
* instances in the group depending on the size of the group.
* (instanceGroupManagers.setTargetPools)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone where the managed instance group is
* located.
* @param string $instanceGroupManager The name of the managed instance group.
* @param InstanceGroupManagersSetTargetPoolsRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function setTargetPools($project, $zone, $instanceGroupManager, InstanceGroupManagersSetTargetPoolsRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('setTargetPools', [$params], Operation::class);
}
/**
* Inserts or updates per-instance configs for the managed instance group.
* perInstanceConfig.name serves as a key used to distinguish whether to perform
* insert or patch. (instanceGroupManagers.updatePerInstanceConfigs)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone where the managed instance group is
* located. It should conform to RFC1035.
* @param string $instanceGroupManager The name of the managed instance group.
* It should conform to RFC1035.
* @param InstanceGroupManagersUpdatePerInstanceConfigsReq $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000).
* @return Operation
*/
public function updatePerInstanceConfigs($project, $zone, $instanceGroupManager, InstanceGroupManagersUpdatePerInstanceConfigsReq $postBody, $optParams = [])
{
$params = ['project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('updatePerInstanceConfigs', [$params], Operation::class);
}
}
// Adding a class alias for backwards compatibility with the previous class name.
class_alias(InstanceGroupManagers::class, 'Google_Service_Compute_Resource_InstanceGroupManagers');