FM / rules.d

/usr/lib/udev/rules.d

Name	Size	Mode	Actions
01-md-raid-creating.rules	321	0644	edit dl rm
40-vm-hotadd.rules	655	0644	edit dl rm
50-apport.rules	165	0644	edit dl rm
50-firmware.rules	210	0644	edit dl rm
50-udev-default.rules	3931	0644	edit dl rm
55-dm.rules	7274	0644	edit dl rm
55-scsi-sg3_id.rules	4781	0644	edit dl rm
56-dm-mpath.rules	4530	0644	edit dl rm
56-dm-parts.rules	1442	0644	edit dl rm
56-lvm.rules	2420	0644	edit dl rm
58-scsi-sg3_symlink.rules	2885	0644	edit dl rm
60-autosuspend-chromiumos.rules	8595	0644	edit dl rm
60-block.rules	703	0644	edit dl rm
60-cdrom_id.rules	1071	0644	edit dl rm
60-drm.rules	413	0644	edit dl rm
60-evdev.rules	990	0644	edit dl rm
60-fido-id.rules	394	0644	edit dl rm
60-input-id.rules	282	0644	edit dl rm
60-multipath.rules	3871	0644	edit dl rm
60-open-vm-tools.rules	250	0644	edit dl rm
60-persistent-alsa.rules	616	0644	edit dl rm
60-persistent-input.rules	2710	0644	edit dl rm
60-persistent-storage-dm.rules	1794	0644	edit dl rm
60-persistent-storage-tape.rules	2135	0644	edit dl rm
60-persistent-storage.rules	7782	0644	edit dl rm
60-persistent-v4l.rules	769	0644	edit dl rm
60-sensor.rules	736	0644	edit dl rm
60-serial.rules	1190	0644	edit dl rm
60-tpm-udev.rules	211	0644	edit dl rm
61-autosuspend-manual.rules	565	0644	edit dl rm
61-persistent-storage-android.rules	456	0644	edit dl rm
63-md-raid-arrays.rules	2130	0644	edit dl rm
64-btrfs-dm.rules	387	0644	edit dl rm
64-btrfs.rules	612	0644	edit dl rm
64-md-raid-assembly.rules	1444	0644	edit dl rm
66-azure-ephemeral.rules	1951	0644	edit dl rm
66-snapd-autoimport.rules	190	0644	edit dl rm
68-del-part-nodes.rules	1142	0644	edit dl rm
69-bcache.rules	1044	0644	edit dl rm
69-lvm-metad.rules	6605	0644	edit dl rm
69-md-clustered-confirm-device.rules	846	0644	edit dl rm
70-iscsi-disk.rules	253	0644	edit dl rm
70-iscsi-network-interface.rules	226	0644	edit dl rm
70-joystick.rules	432	0644	edit dl rm
70-mouse.rules	734	0644	edit dl rm
70-power-switch.rules	568	0644	edit dl rm
70-touchpad.rules	473	0644	edit dl rm
70-uaccess.rules	2800	0644	edit dl rm
71-power-switch-proliant.rules	461	0644	edit dl rm
71-seat.rules	3782	0644	edit dl rm
73-seat-late.rules	636	0644	edit dl rm
73-special-net-names.rules	969	0644	edit dl rm
75-net-description.rules	452	0644	edit dl rm
75-probe_mtd.rules	174	0644	edit dl rm
78-graphics-card.rules	965	0644	edit dl rm
78-sound-card.rules	4816	0644	edit dl rm
80-debian-compat.rules	1375	0644	edit dl rm
80-drivers.rules	615	0644	edit dl rm
80-net-setup-link.rules	295	0644	edit dl rm
81-net-dhcp.rules	528	0644	edit dl rm
85-hdparm.rules	82	0644	edit dl rm
90-bolt.rules	350	0644	edit dl rm
90-console-setup.rules	265	0644	edit dl rm
90-fwupd-devices.rules	1472	0644	edit dl rm
95-dm-notify.rules	479	0644	edit dl rm
95-kpartx.rules	1335	0644	edit dl rm
96-e2scrub.rules	171	0644	edit dl rm
99-systemd.rules	4713	0644	edit dl rm
99-vmware-scsi-udev.rules	433	0644	edit dl rm

Edit: /usr/lib/udev/rules.d/50-udev-default.rules (3931B)

# do not edit this file, it will be overwritten on update

# run a command on remove events
ACTION=="remove", ENV{REMOVE_CMD}!="", RUN+="$env{REMOVE_CMD}"
ACTION=="remove", GOTO="default_end"

SUBSYSTEM=="virtio-ports", KERNEL=="vport*", ATTR{name}=="?*", SYMLINK+="virtio-ports/$attr{name}"

# select "system RTC" or just use the first one
SUBSYSTEM=="rtc", ATTR{hctosys}=="1", SYMLINK+="rtc"
SUBSYSTEM=="rtc", KERNEL=="rtc0", SYMLINK+="rtc", OPTIONS+="link_priority=-100"

SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", IMPORT{builtin}="usb_id", IMPORT{builtin}="hwdb --subsystem=usb"
ENV{MODALIAS}!="", IMPORT{builtin}="hwdb --subsystem=$env{SUBSYSTEM}"

ACTION!="add", GOTO="default_end"

SUBSYSTEM=="tty", KERNEL=="ptmx", GROUP="tty", MODE="0666"
SUBSYSTEM=="tty", KERNEL=="tty", GROUP="tty", MODE="0666"
SUBSYSTEM=="tty", KERNEL=="tty[0-9]*", GROUP="tty", MODE="0620"
SUBSYSTEM=="tty", KERNEL=="sclp_line[0-9]*", GROUP="tty", MODE="0620"
SUBSYSTEM=="tty", KERNEL=="ttysclp[0-9]*", GROUP="tty", MODE="0620"
SUBSYSTEM=="tty", KERNEL=="3270/tty[0-9]*", GROUP="tty", MODE="0620"
SUBSYSTEM=="vc", KERNEL=="vcs*|vcsa*", GROUP="tty"
KERNEL=="tty[A-Z]*[0-9]|ttymxc[0-9]*|pppox[0-9]*|ircomm[0-9]*|noz[0-9]*|rfcomm[0-9]*", GROUP="dialout"

SUBSYSTEM=="mem", KERNEL=="mem|kmem|port", GROUP="kmem", MODE="0640"

SUBSYSTEM=="input", GROUP="input"
SUBSYSTEM=="input", KERNEL=="js[0-9]*", MODE="0664"

SUBSYSTEM=="video4linux", GROUP="video"
SUBSYSTEM=="graphics", GROUP="video"
SUBSYSTEM=="drm", KERNEL!="renderD*", GROUP="video"
SUBSYSTEM=="dvb", GROUP="video"
SUBSYSTEM=="media", GROUP="video"
SUBSYSTEM=="cec", GROUP="video"

SUBSYSTEM=="drm", KERNEL=="renderD*", GROUP="render", MODE="0660"
SUBSYSTEM=="kfd", GROUP="render", MODE="0660"

# When using static_node= with non-default permissions, also update
# tmpfiles.d/static-nodes-permissions.conf.in to keep permissions synchronized.

SUBSYSTEM=="sound", GROUP="audio", \
  OPTIONS+="static_node=snd/seq", OPTIONS+="static_node=snd/timer"

SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", MODE="0664"

SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x00010*", GROUP="video"
SUBSYSTEM=="firewire", ATTR{units}=="*0x00b09d:0x00010*", GROUP="video"
SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x010001*", GROUP="video"
SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x014001*", GROUP="video"

KERNEL=="parport[0-9]*", GROUP="lp"
SUBSYSTEM=="printer", KERNEL=="lp*", GROUP="lp"
SUBSYSTEM=="ppdev", GROUP="lp"
KERNEL=="lp[0-9]*", GROUP="lp"
KERNEL=="irlpt[0-9]*", GROUP="lp"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0701??:*", GROUP="lp"

SUBSYSTEM=="block", GROUP="disk"
SUBSYSTEM=="block", KERNEL=="sr[0-9]*", GROUP="cdrom"
SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="4|5", GROUP="cdrom"
KERNEL=="sch[0-9]*", GROUP="cdrom"
KERNEL=="pktcdvd[0-9]*", GROUP="cdrom"
KERNEL=="pktcdvd", GROUP="cdrom"

SUBSYSTEM=="scsi_generic|scsi_tape", SUBSYSTEMS=="scsi", ATTRS{type}=="1|8", GROUP="tape"
SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="0", GROUP="disk"
KERNEL=="qft[0-9]*|nqft[0-9]*|zqft[0-9]*|nzqft[0-9]*|rawqft[0-9]*|nrawqft[0-9]*", GROUP="disk"
KERNEL=="loop-control", GROUP="disk", OPTIONS+="static_node=loop-control"
KERNEL=="btrfs-control", GROUP="disk"
KERNEL=="rawctl", GROUP="disk"
SUBSYSTEM=="raw", KERNEL=="raw[0-9]*", GROUP="disk"
SUBSYSTEM=="aoe", GROUP="disk", MODE="0220"
SUBSYSTEM=="aoe", KERNEL=="err", MODE="0440"

KERNEL=="rfkill", MODE="0664"
KERNEL=="tun", MODE="0666", OPTIONS+="static_node=net/tun"

KERNEL=="fuse", MODE="0666", OPTIONS+="static_node=fuse"

# The static_node is required on s390x and ppc (they are using MODULE_ALIAS)
KERNEL=="kvm", GROUP="kvm", MODE="0660", OPTIONS+="static_node=kvm"

KERNEL=="udmabuf", GROUP="kvm"

SUBSYSTEM=="ptp", ATTR{clock_name}=="KVM virtual PTP", SYMLINK += "ptp_kvm"

SUBSYSTEM=="ptp", ATTR{clock_name}=="hyperv", SYMLINK += "ptp_hyperv"

LABEL="default_end"

# do not edit this file, it will be overwritten on update # run a command on remove events ACTION=="remove", ENV{REMOVE_CMD}!="", RUN+="$env{REMOVE_CMD}" ACTION=="remove", GOTO="default_end" SUBSYSTEM=="virtio-ports", KERNEL=="vport*", ATTR{name}=="?*", SYMLINK+="virtio-ports/$attr{name}" # select "system RTC" or just use the first one SUBSYSTEM=="rtc", ATTR{hctosys}=="1", SYMLINK+="rtc" SUBSYSTEM=="rtc", KERNEL=="rtc0", SYMLINK+="rtc", OPTIONS+="link_priority=-100" SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", IMPORT{builtin}="usb_id", IMPORT{builtin}="hwdb --subsystem=usb" ENV{MODALIAS}!="", IMPORT{builtin}="hwdb --subsystem=$env{SUBSYSTEM}" ACTION!="add", GOTO="default_end" SUBSYSTEM=="tty", KERNEL=="ptmx", GROUP="tty", MODE="0666" SUBSYSTEM=="tty", KERNEL=="tty", GROUP="tty", MODE="0666" SUBSYSTEM=="tty", KERNEL=="tty[0-9]*", GROUP="tty", MODE="0620" SUBSYSTEM=="tty", KERNEL=="sclp_line[0-9]*", GROUP="tty", MODE="0620" SUBSYSTEM=="tty", KERNEL=="ttysclp[0-9]*", GROUP="tty", MODE="0620" SUBSYSTEM=="tty", KERNEL=="3270/tty[0-9]*", GROUP="tty", MODE="0620" SUBSYSTEM=="vc", KERNEL=="vcs*|vcsa*", GROUP="tty" KERNEL=="tty[A-Z]*[0-9]|ttymxc[0-9]*|pppox[0-9]*|ircomm[0-9]*|noz[0-9]*|rfcomm[0-9]*", GROUP="dialout" SUBSYSTEM=="mem", KERNEL=="mem|kmem|port", GROUP="kmem", MODE="0640" SUBSYSTEM=="input", GROUP="input" SUBSYSTEM=="input", KERNEL=="js[0-9]*", MODE="0664" SUBSYSTEM=="video4linux", GROUP="video" SUBSYSTEM=="graphics", GROUP="video" SUBSYSTEM=="drm", KERNEL!="renderD*", GROUP="video" SUBSYSTEM=="dvb", GROUP="video" SUBSYSTEM=="media", GROUP="video" SUBSYSTEM=="cec", GROUP="video" SUBSYSTEM=="drm", KERNEL=="renderD*", GROUP="render", MODE="0660" SUBSYSTEM=="kfd", GROUP="render", MODE="0660" # When using static_node= with non-default permissions, also update # tmpfiles.d/static-nodes-permissions.conf.in to keep permissions synchronized. SUBSYSTEM=="sound", GROUP="audio", \ OPTIONS+="static_node=snd/seq", OPTIONS+="static_node=snd/timer" SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", MODE="0664" SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x00010*", GROUP="video" SUBSYSTEM=="firewire", ATTR{units}=="*0x00b09d:0x00010*", GROUP="video" SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x010001*", GROUP="video" SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x014001*", GROUP="video" KERNEL=="parport[0-9]*", GROUP="lp" SUBSYSTEM=="printer", KERNEL=="lp*", GROUP="lp" SUBSYSTEM=="ppdev", GROUP="lp" KERNEL=="lp[0-9]*", GROUP="lp" KERNEL=="irlpt[0-9]*", GROUP="lp" SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0701??:*", GROUP="lp" SUBSYSTEM=="block", GROUP="disk" SUBSYSTEM=="block", KERNEL=="sr[0-9]*", GROUP="cdrom" SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="4|5", GROUP="cdrom" KERNEL=="sch[0-9]*", GROUP="cdrom" KERNEL=="pktcdvd[0-9]*", GROUP="cdrom" KERNEL=="pktcdvd", GROUP="cdrom" SUBSYSTEM=="scsi_generic|scsi_tape", SUBSYSTEMS=="scsi", ATTRS{type}=="1|8", GROUP="tape" SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="0", GROUP="disk" KERNEL=="qft[0-9]*|nqft[0-9]*|zqft[0-9]*|nzqft[0-9]*|rawqft[0-9]*|nrawqft[0-9]*", GROUP="disk" KERNEL=="loop-control", GROUP="disk", OPTIONS+="static_node=loop-control" KERNEL=="btrfs-control", GROUP="disk" KERNEL=="rawctl", GROUP="disk" SUBSYSTEM=="raw", KERNEL=="raw[0-9]*", GROUP="disk" SUBSYSTEM=="aoe", GROUP="disk", MODE="0220" SUBSYSTEM=="aoe", KERNEL=="err", MODE="0440" KERNEL=="rfkill", MODE="0664" KERNEL=="tun", MODE="0666", OPTIONS+="static_node=net/tun" KERNEL=="fuse", MODE="0666", OPTIONS+="static_node=fuse" # The static_node is required on s390x and ppc (they are using MODULE_ALIAS) KERNEL=="kvm", GROUP="kvm", MODE="0660", OPTIONS+="static_node=kvm" KERNEL=="udmabuf", GROUP="kvm" SUBSYSTEM=="ptp", ATTR{clock_name}=="KVM virtual PTP", SYMLINK += "ptp_kvm" SUBSYSTEM=="ptp", ATTR{clock_name}=="hyperv", SYMLINK += "ptp_hyperv" LABEL="default_end"