/usr/lib/python3/dist-packages/twisted/internet
Edit: /usr/lib/python3/dist-packages/twisted/internet/epollreactor.py (8493B)
# Copyright (c) Twisted Matrix Laboratories.
# See LICENSE for details.
"""
An epoll() based implementation of the twisted main loop.
To install the event loop (and you should do this before any connections,
listeners or connectors are added)::
from twisted.internet import epollreactor
epollreactor.install()
"""
from __future__ import division, absolute_import
from select import epoll, EPOLLHUP, EPOLLERR, EPOLLIN, EPOLLOUT
import errno
from zope.interface import implementer
from twisted.internet.interfaces import IReactorFDSet
from twisted.python import log
from twisted.internet import posixbase
@implementer(IReactorFDSet)
class EPollReactor(posixbase.PosixReactorBase, posixbase._PollLikeMixin):
"""
A reactor that uses epoll(7).
@ivar _poller: A C{epoll} which will be used to check for I/O
readiness.
@ivar _selectables: A dictionary mapping integer file descriptors to
instances of C{FileDescriptor} which have been registered with the
reactor. All C{FileDescriptors} which are currently receiving read or
write readiness notifications will be present as values in this
dictionary.
@ivar _reads: A set containing integer file descriptors. Values in this
set will be registered with C{_poller} for read readiness notifications
which will be dispatched to the corresponding C{FileDescriptor}
instances in C{_selectables}.
@ivar _writes: A set containing integer file descriptors. Values in this
set will be registered with C{_poller} for write readiness
notifications which will be dispatched to the corresponding
C{FileDescriptor} instances in C{_selectables}.
@ivar _continuousPolling: A L{_ContinuousPolling} instance, used to handle
file descriptors (e.g. filesystem files) that are not supported by
C{epoll(7)}.
"""
# Attributes for _PollLikeMixin
_POLL_DISCONNECTED = (EPOLLHUP | EPOLLERR)
_POLL_IN = EPOLLIN
_POLL_OUT = EPOLLOUT
def __init__(self):
"""
Initialize epoll object, file descriptor tracking dictionaries, and the
base class.
"""
# Create the poller we're going to use. The 1024 here is just a hint
# to the kernel, it is not a hard maximum. After Linux 2.6.8, the size
# argument is completely ignored.
self._poller = epoll(1024)
self._reads = set()
self._writes = set()
self._selectables = {}
self._continuousPolling = posixbase._ContinuousPolling(self)
posixbase.PosixReactorBase.__init__(self)
def _add(self, xer, primary, other, selectables, event, antievent):
"""
Private method for adding a descriptor from the event loop.
It takes care of adding it if new or modifying it if already added
for another state (read -> read/write for example).
"""
fd = xer.fileno()
if fd not in primary:
flags = event
# epoll_ctl can raise all kinds of IOErrors, and every one
# indicates a bug either in the reactor or application-code.
# Let them all through so someone sees a traceback and fixes
# something. We'll do the same thing for every other call to
# this method in this file.
if fd in other:
flags |= antievent
self._poller.modify(fd, flags)
else:
self._poller.register(fd, flags)
# Update our own tracking state *only* after the epoll call has
# succeeded. Otherwise we may get out of sync.
primary.add(fd)
selectables[fd] = xer
def addReader(self, reader):
"""
Add a FileDescriptor for notification of data available to read.
"""
try:
self._add(reader, self._reads, self._writes, self._selectables,
EPOLLIN, EPOLLOUT)
except IOError as e:
if e.errno == errno.EPERM:
# epoll(7) doesn't support certain file descriptors,
# e.g. filesystem files, so for those we just poll
# continuously:
self._continuousPolling.addReader(reader)
else:
raise
def addWriter(self, writer):
"""
Add a FileDescriptor for notification of data available to write.
"""
try:
self._add(writer, self._writes, self._reads, self._selectables,
EPOLLOUT, EPOLLIN)
except IOError as e:
if e.errno == errno.EPERM:
# epoll(7) doesn't support certain file descriptors,
# e.g. filesystem files, so for those we just poll
# continuously:
self._continuousPolling.addWriter(writer)
else:
raise
def _remove(self, xer, primary, other, selectables, event, antievent):
"""
Private method for removing a descriptor from the event loop.
It does the inverse job of _add, and also add a check in case of the fd
has gone away.
"""
fd = xer.fileno()
if fd == -1:
for fd, fdes in selectables.items():
if xer is fdes:
break
else:
return
if fd in primary:
if fd in other:
flags = antievent
# See comment above modify call in _add.
self._poller.modify(fd, flags)
else:
del selectables[fd]
# See comment above _control call in _add.
self._poller.unregister(fd)
primary.remove(fd)
def removeReader(self, reader):
"""
Remove a Selectable for notification of data available to read.
"""
if self._continuousPolling.isReading(reader):
self._continuousPolling.removeReader(reader)
return
self._remove(reader, self._reads, self._writes, self._selectables,
EPOLLIN, EPOLLOUT)
def removeWriter(self, writer):
"""
Remove a Selectable for notification of data available to write.
"""
if self._continuousPolling.isWriting(writer):
self._continuousPolling.removeWriter(writer)
return
self._remove(writer, self._writes, self._reads, self._selectables,
EPOLLOUT, EPOLLIN)
def removeAll(self):
"""
Remove all selectables, and return a list of them.
"""
return (self._removeAll(
[self._selectables[fd] for fd in self._reads],
[self._selectables[fd] for fd in self._writes]) +
self._continuousPolling.removeAll())
def getReaders(self):
return ([self._selectables[fd] for fd in self._reads] +
self._continuousPolling.getReaders())
def getWriters(self):
return ([self._selectables[fd] for fd in self._writes] +
self._continuousPolling.getWriters())
def doPoll(self, timeout):
"""
Poll the poller for new events.
"""
if timeout is None:
timeout = -1 # Wait indefinitely.
try:
# Limit the number of events to the number of io objects we're
# currently tracking (because that's maybe a good heuristic) and
# the amount of time we block to the value specified by our
# caller.
l = self._poller.poll(timeout, len(self._selectables))
except IOError as err:
if err.errno == errno.EINTR:
return
# See epoll_wait(2) for documentation on the other conditions
# under which this can fail. They can only be due to a serious
# programming error on our part, so let's just announce them
# loudly.
raise
_drdw = self._doReadOrWrite
for fd, event in l:
try:
selectable = self._selectables[fd]
except KeyError:
pass
else:
log.callWithLogger(selectable, _drdw, selectable, fd, event)
doIteration = doPoll
def install():
"""
Install the epoll() reactor.
"""
p = EPollReactor()
from twisted.internet.main import installReactor
installReactor(p)
__all__ = ["EPollReactor", "install"]